Cockpitbuilders.com

CockpitBuilders.com - Main => Aircraft Dimensions => Topic started by: ifeliciano on May 13, 2018, 02:47:26 AM

Title: Another AC/DC Panel dimenssion request
Post by: ifeliciano on May 13, 2018, 02:47:26 AM
Can someone assist with the A and B measurements?

(https://i.imgur.com/RpkJpl8.png)
Title: Re: Another AC/DC Panel dimenssion request
Post by: Joe Lavery on May 13, 2018, 05:35:53 AM
I have the FDS pane so I assume it will be spot on!

A is 45.5mm
B is 14mm

Hope that helps.
Title: Re: Another AC/DC Panel dimenssion request
Post by: mickc on May 13, 2018, 08:54:13 AM
OEM measurement is 20.5mm x 35.5mm

OEM panels use the short switch guard for this switch, where FDS use the standard one
Title: Re: Another AC/DC Panel dimenssion request
Post by: ifeliciano on May 13, 2018, 03:35:47 PM
Thank you gents!! I was pretty darn close in my original design 19.5mm x 33.25.mm.
Title: Re: Another AC/DC Panel dimenssion request
Post by: bernard S on May 16, 2018, 12:23:58 PM
here is yiur solution re panel sizes get 1.1 cockpit posters used for t3aining aids