Cockpitbuilders.com

CockpitBuilders.com - Main => General Discusion Board. => Topic started by: bernard S on March 11, 2019, 03:57:51 PM

Title: Holy Grail ?
Post by: bernard S on March 11, 2019, 03:57:51 PM
finally
Title: Re: Holy Grail ?
Post by: jackpilot on March 11, 2019, 04:18:59 PM
Beauty!!
Title: Re: Holy Grail ?
Post by: gufau on March 12, 2019, 02:09:19 PM
more precision ?
Title: Re: Holy Grail ?
Post by: bernard S on March 12, 2019, 05:03:58 PM
they 8x8 displays so one needs do nothing except plug and play 😎😁
Title: Re: Holy Grail ?
Post by: Garys on March 12, 2019, 07:00:31 PM
More info needed please. They don't look like real units but at the same time look larger than a custom cut LCD.
Title: Re: Holy Grail ?
Post by: bernard S on March 12, 2019, 09:33:02 PM
they are not the aircraft LCDs   that would cause same issue using aircraft CRTs .. They are cut LCD 8x8 viewable as per the aircraft CRTs the bezel in centre is for placement .. the software you see is just proof LCDs work .. the software I use allows me to resize so i can go to the edge of the 74 CRTs bezels which I will remove from the aircraft CRTs
Title: Re: Holy Grail ?
Post by: FredK on March 12, 2019, 11:15:55 PM
Okay....It is already clear that Bernard's project is in a totally different league than most......

But .....Bernard....when you say that these are "Cut" 8x8 LCD's do you mean that they were custom fabricated to size or what?

What resolution?

Fred K
Title: Re: Holy Grail ?
Post by: Trevor Hale on March 13, 2019, 11:04:45 AM
Don’t you need 4? One for the Lower DU?


Trev
Title: Re: Holy Grail ?
Post by: bernard S on March 13, 2019, 11:08:00 AM
6  trev.. 6 are required x 2 pfd x2 nd  x1 upper x1 lower
Title: Re: Holy Grail ?
Post by: Trevor Hale on March 13, 2019, 11:49:29 AM
Oh Crap..  Right...  (Lost my head)
Title: Re: Holy Grail ?
Post by: bernard S on March 13, 2019, 01:33:58 PM
for Fred and Gray
Title: Re: Holy Grail ?
Post by: jskibo on March 13, 2019, 04:16:17 PM
Supplier?
Title: Re: Holy Grail ?
Post by: FredK on March 14, 2019, 08:59:13 AM
Flexible screen cut to size and mounted on rigid surface?

Fred K
Title: Re: Holy Grail ?
Post by: bernard S on March 14, 2019, 10:34:11 AM
Fred    they  cut  screen then each  requires video controller  mounted into box with two power mumbles x1 at 12 and x1 at 28 plus video .. plus dimmer board wires to selector switches
Title: Re: Holy Grail ?
Post by: bernard S on March 20, 2019, 06:05:06 PM
still a wip
Title: Re: Holy Grail ?
Post by: bernard S on April 07, 2019, 07:49:18 AM
getting there chaps    huge difference one got broken in transit    going to be interesting fight (conversation) with UPS adjuster arriving this week ..yes FDS CDUs for moment best bang for buck whist the real CDUs are being sorted