Cockpit

* User Profile

Welcome, Guest. Please login or register.

Login with username, password and session length

Who's Online

  • *Users: 0
  • *Guests: 55
  • *Total: 55

Our Discord

Author Topic: Boeing 767 Column Neutral Angle  (Read 2516 times)

Offline tomenglish2000

  • Forum GURU
  • *
  • Posts: 17
  • Aviation Enthusiast
  • First Name: Tom
  • Home Location: Stafford
Boeing 767 Column Neutral Angle
« on: September 11, 2017, 09:38:31 AM »
Hi all!

I am looking for information about where the 767 column sits when released.

The F/O column moves 8.25 to 8.5 degrees FWD and 10.67 to 10.90 degrees AFT from the neutral point.
The CPT column moves 8.75 to 9 degrees FWD and 11 to 11.25 degrees AFT from the neutral point.

Where is the neutral point for the columns? Is it straight up? Or is it slightly FWD. If you don't know the angle even a measurement from the front of the column to the nearest part of the MIP would allow me to figure this angle out (or at least approximate it!).

I understand that the 737 column sits FWD of upright (8 degrees I think) when neutral. Is the 767 similar? All the pictures I have seen can be interpreted as bolt upright or slightly FWD, so I cannot tell which it is.

Please note that this neutral position should not include movement from the Elevator Neutral Shift and Override Mechanism (so when the aircraft is trimmed less than approx 8.4 units of trim).

Also if someone can explain how two columns that are linked (albeit by an override mechanism) are able to have different movements FWD and AFT I would be interested to know!

Please let me know if you can help!

Thanks.
Tom.

Offline jackpilot

  • Moderator
  • I am chained to this website!
  • *
  • Posts: 4,110
  • 737-800 Sim-Avionics/Full Cockpit FDS + OEM P3D V4
  • First Name: Jack
  • Home Location: Montreal / Canada
Re: Boeing 767 Column Neutral Angle
« Reply #1 on: September 11, 2017, 03:15:15 PM »
Hi Tom
Not sure about that but anyway seems to me it has to sit a bit forward, like the 737,  and besides I do not think that you should worry about measures like 8.25 or 8.75 degrees ...a quater or half of a degree is not really measurable nor vital ...lol
Nevertheless there are 757/67 specialists here and I'm pretty sure they will chime in.


Jack

Offline tomenglish2000

  • Forum GURU
  • *
  • Posts: 17
  • Aviation Enthusiast
  • First Name: Tom
  • Home Location: Stafford
Re: Boeing 767 Column Neutral Angle
« Reply #2 on: September 12, 2017, 04:45:14 AM »
Hi Jack,

I only put the degrees on to illustrate that the CPT side and F/O side were different as I would like to know if anyone can explain why?

Although 0.5 degrees is 8mm of deflection at the top of the column I dont think I will loose sleep over that! :-)

With the 767 columns not being straight cylinders I do not see any reason for them to be angled forward for any clearance issues etc but looking at photos, some look like they are angled forward and some look like they are straight up.

If they are angled forward 8 degrees like the 737 it's 13.2 centimetres deflection to the neutral from upright. As the photos look like it may be almost upright I guess the angle is much less that 8 degrees if it is not upright at all.

Are there any 767 drivers out here who could take a look at this? It doesn't have to be accurate, I just want them to look right and be comfortable from an ergonomic point of view (although I know cockpits aren't always ergonomic!).

Tom.

Offline Garys

  • Forum GURU
  • *
  • Posts: 407
  • First Name: Gary
  • Home Location: Canada
Re: Boeing 767 Column Neutral Angle
« Reply #3 on: September 12, 2017, 06:32:22 AM »
I just went and had a look. The column is angled fwd but very slightly. Nowhere near as pronounced as the  737. Only a few degrees at most. The shape of the column also makes it difficult to tell without using a square. In the neutral position with hydraulics on the top of the yoke was approximately 13" from the upper bezel of the top CRT.

As for the reason that the f/0 side and captain side having different range of motion can only be because the overide mechanism/cam.

Offline tomenglish2000

  • Forum GURU
  • *
  • Posts: 17
  • Aviation Enthusiast
  • First Name: Tom
  • Home Location: Stafford
Re: Boeing 767 Column Neutral Angle
« Reply #4 on: September 12, 2017, 06:43:52 AM »
Fantastic Gary!

Thanks for taking a look. Can you please clarify where on the top of the column that 13" is from? I have attached a pic for reference.

Sounds like the pics I were looking at on Airliners had it right, I couldn't tell it was upright or just slightly away.

Thanks.
Tom.

Offline Garys

  • Forum GURU
  • *
  • Posts: 407
  • First Name: Gary
  • Home Location: Canada
Re: Boeing 767 Column Neutral Angle
« Reply #5 on: September 12, 2017, 08:50:47 AM »
No problem Tom. That measurement would be C.

Cheers
Gary

Offline tomenglish2000

  • Forum GURU
  • *
  • Posts: 17
  • Aviation Enthusiast
  • First Name: Tom
  • Home Location: Stafford
Re: Boeing 767 Column Neutral Angle
« Reply #6 on: September 12, 2017, 08:51:59 AM »
Thanks Gary,

I appreciate the help.
Tom.

Offline jackpilot

  • Moderator
  • I am chained to this website!
  • *
  • Posts: 4,110
  • 737-800 Sim-Avionics/Full Cockpit FDS + OEM P3D V4
  • First Name: Jack
  • Home Location: Montreal / Canada
Re: Boeing 767 Column Neutral Angle
« Reply #7 on: September 12, 2017, 09:52:29 AM »
Thanks for helping out Gary...your knowledge base is an invaluable asset for this forum.
 :)


Jack

Offline jonesthesoftware

  • Forum GURU
  • *
  • Posts: 44
  • 767 cockpit builder
  • First Name: geoff jones
  • Home Location: Aberdare, South Wales, UK
Re: Boeing 767 Column Neutral Angle
« Reply #8 on: September 12, 2017, 12:33:36 PM »
Info from the manual is .....

rotation of control wheel is +65 deg to -65deg @37-50NM
Column angle is 9 deg fwd and 11 deg back @130-420NM
Column rest position is 5 deg fwd
hope this helps
geoff
Building a 767 cockpit

Offline tomenglish2000

  • Forum GURU
  • *
  • Posts: 17
  • Aviation Enthusiast
  • First Name: Tom
  • Home Location: Stafford
Re: Boeing 767 Column Neutral Angle
« Reply #9 on: September 12, 2017, 01:05:29 PM »
Hi Geoff.

Which manual did you find that in? I couldn't find it in my AMM.

Thanks for looking it up.
Tom.

Offline jonesthesoftware

  • Forum GURU
  • *
  • Posts: 44
  • 767 cockpit builder
  • First Name: geoff jones
  • Home Location: Aberdare, South Wales, UK
Re: Boeing 767 Column Neutral Angle
« Reply #10 on: September 13, 2017, 01:57:40 PM »
Hi Tom
can't remember which manual it's so long ago but I included this info in my Autocad drawing for the whole cockpit. Can't post anything here so email me and I 'll send you a copy.
jonesthesoftware at gmail.com
I have quite a few manuals and quite a bit of 3D drawings for the MIP and support structure, pedals, Yoke and columns of my home built cockpit
regards
geoff
Building a 767 cockpit

 

FlightSimExpo 2019

FsExpo

COUNTDOWN TO WF2019


WORLDFLIGHT TEAM USA

Will Depart in...

Recent Posts

How to install DZUS fasteners?
by Buster99
[June 22, 2019, 04:12:34 PM]
Desert Air Spares - Trustworthy?
by kattz
[June 22, 2019, 12:40:51 PM]
Wanted - 737 Audio Panels - OEM
by jackpilot
[June 20, 2019, 12:26:51 PM]
Throttletek 737 Throttle For Sale
by kevinsayre
[June 19, 2019, 03:57:33 PM]
For sale - rudder pedals and linkages - pending to Craig
by Caflyt
[June 19, 2019, 07:49:14 AM]
Flooring Installed!
by Mach7
[June 18, 2019, 05:41:16 PM]
737-800 Arduino X-Plane Build
by kurt-olsson
[June 18, 2019, 11:26:12 AM]
737 Throttle Conversion OC + ProSim
by kattz
[June 16, 2019, 11:39:03 AM]
A friendly FYI on Boeing rudder pedals
by kattz
[June 15, 2019, 10:36:39 AM]
2020 Microsoft Flight Simulator - new at E3 2019
by 757Simulator
[June 14, 2019, 03:39:07 AM]
737 starter switch mechanism
by paulnd
[June 13, 2019, 02:58:39 PM]
Make up your mind, Microsoft!
by jmlohrenz
[June 12, 2019, 07:25:10 PM]
What have you done for your simulator today?
by C150DIY
[June 12, 2019, 12:53:27 PM]
Complete 737-800 cockpit - moving sale
by FaustoP
[June 12, 2019, 01:26:39 AM]
Flyengravity desktop MIP
by patiju
[June 10, 2019, 01:01:06 PM]
the perfect thing to complete your sim hanger
by fsaviator
[June 09, 2019, 03:12:50 PM]
Wanted - COMPLETE set of Boeing 727 or 737 rudder pedals
by kattz
[June 08, 2019, 01:26:09 PM]
Visual system screen by Northern Flight Sim for sale $500
by peterkwu
[June 08, 2019, 06:07:39 AM]
Wanted: GoFlight T8
by C150DIY
[June 07, 2019, 02:32:29 PM]
For Sale - CPFlight MCP737 + EFIS
by ZillaUK
[June 07, 2019, 09:54:58 AM]
737 FWD Overhead Switch Diagram
by bernard S
[June 07, 2019, 08:21:46 AM]
Change the Forum Theme to suit your own Needs.
by AdamMilstead
[June 07, 2019, 06:20:41 AM]
Aileron & Elevator jump back to center
by iwik
[June 06, 2019, 08:01:24 PM]
Join me on Vatsim Tonight
by Trevor Hale
[June 05, 2019, 05:17:13 PM]
Machinery for home cockpit building
by giaviv
[June 04, 2019, 04:12:10 PM]
PROMOCION STEERING FREE
by alvaro castillo
[June 04, 2019, 11:42:43 AM]
FLIGHTSIMEXPO LAUNCHES DISCOUNTED ADVANCE REGISTRATION FOR ORLANDO 2019 EVENT
by fsaviator
[June 03, 2019, 06:52:44 PM]
Question about linking the yokes
by jackpilot
[June 01, 2019, 02:22:10 PM]
Wanted: Jetmax 737
by nisx
[May 30, 2019, 01:49:24 AM]
Cessna 150 Builder
by C150DIY
[May 27, 2019, 04:59:48 AM]