Cockpit

* User Profile

Welcome, Guest. Please login or register.

Login with username, password and session length

Who's Online

  • *Users: 1
  • *Guests: 61
  • *Total: 62

Our Discord

Author Topic: Aerosoft Australia Strikes Again!  (Read 9769 times)

Offline jackpilot

  • Moderator
  • I am chained to this website!
  • *
  • Posts: 4,123
  • 737-800 Sim-Avionics/Full Cockpit FDS + OEM P3D V4
  • First Name: Jack
  • Home Location: Montreal / Canada
Aerosoft Australia Strikes Again!
« on: October 28, 2010, 03:52:12 PM »
A new 737 Avionics Package for FSX ...at AUD 60 !!

That combo seems to be aiming at the "high end" desktop simmers more than the full cockpit builders, as some systems are apparently not modeled,  but at that price, coming from a serious vendor, it might be the bargain of the moment for some .Worth a try, full Demo working for 30 days.  http://www.aerosoft.com.au/home/home.html
« Last Edit: January 30, 2011, 04:04:54 PM by jackpilot »


Jack

Offline Aerosim Solutions

  • I may as well be Staff!
  • *
  • Posts: 693
  • Simulator part supplier
    • Aerosim Solutions
  • First Name: Gwyn Perrett
  • Home Location: Perth, Western Australia
Re: Aerosoft Australia Strikes Again!
« Reply #1 on: October 29, 2010, 06:51:42 AM »
I have been talkin to Andrew the owner of Aerosoft and he is planning to introduce interface capabilities soon, I think he will do well with this product!

Cheers Gwyn
Boeing 737NG using Prepar3D v3.35, Prosim737, FDS SYS cards, FDS CDUs, CP Flight EL MCP & EFIS & Aerosim Solutions hardware of course!
Check out my website here -
http://www.aerosimsolutions.com.au

Offline jackpilot

  • Moderator
  • I am chained to this website!
  • *
  • Posts: 4,123
  • 737-800 Sim-Avionics/Full Cockpit FDS + OEM P3D V4
  • First Name: Jack
  • Home Location: Montreal / Canada
Re: Aerosoft Australia Strikes Again!
« Reply #2 on: October 29, 2010, 09:01:44 AM »
I have been talkin to Andrew the owner of Aerosoft

Say Hello to him. He is a very nice and talented guy. I was one of the firsts to get my Aerosoft MCP, Ions ago!!
Still have it BTW.. built like a tank.
That Avionics project was already on the drawing board at that time .
Good memories.
Jack


Jack

Offline jackpilot

  • Moderator
  • I am chained to this website!
  • *
  • Posts: 4,123
  • 737-800 Sim-Avionics/Full Cockpit FDS + OEM P3D V4
  • First Name: Jack
  • Home Location: Montreal / Canada
Re: Aerosoft Australia Strikes Again!
« Reply #3 on: January 30, 2011, 04:08:05 PM »
Some news ...
here is a reprint from Avsim news.
That software seems to be aiming higher...TBC for sure.

Aerosoft Australia has updated its AeroSystems B737 Avionics suite for the 737. This version now has a traffic advisory display that shows the location and altitude of other aircraft. Best of all though is the support for Flight Deck Solutions B737NG-PROMX-CDU. No programming is required, just plug in and configure. The software also has a new display that allows scaling and positioning of the CDU text window anywhere on the screen. Select full screen mode, plug in your FDS CDU and you have a very real set up. Tens of thousands of waypoints, airports, runways, navaids and airways from Navigraph come with the software, all accessible through the CDU.


Jack

Offline Mink

  • Forum GURU
  • *
  • Posts: 57
  • Aviation Enthusiast
  • First Name: Kresimir
  • Home Location: ETNN near Cologne, Germany
Re: Aerosoft Australia Strikes Again!
« Reply #4 on: September 10, 2011, 02:53:49 PM »
Aerosoft released a new version 3.0a of their avionic suite. Direct support for goflight mcp pro and efis, but also now for cpflight
Mcp and Efis. Autoland possible etc, sids now for the fmc, stars coming with later version.
For cockpit builder like me, beginning, testing etc, the best way to start working wih a glass cokpit software.

Greetings from Germany (EDDK - Cologne)
Kresimir,

Offline bnepethomas

  • Forum GURU
  • *
  • Posts: 23
  • Aviation Tragic
  • First Name: Peter Thomas
Re: Aerosoft Australia Strikes Again!
« Reply #5 on: October 28, 2011, 06:26:14 PM »
Hi Guys

Anyone got the FDS CDU running with Aersoft?  Can select Aersoft in the CDU driver, but for the life of me the display doesn't come up and keystrokes aren't recognised.  CDU works as expected when in test mode.

Cheers

Peter

Offline Jetcos

  • Forum GURU
  • *
  • Posts: 184
  • Tech Support
    • Flightdeck Solutions Ltd.
  • First Name: Steve
  • Home Location: Newmarket, Ontario
Re: Aerosoft Australia Strikes Again!
« Reply #6 on: October 29, 2011, 10:29:50 AM »
I have it working now.

No real secrets, configured in the FDS-CDU software for Aerosystems. Saved.

Make sure the CDU software is running when everything starts up.

Try to re-configure it while everything is running and see if it starts up? Save. Just as a test?
Steve Cos
Flightdeck Solutions, Newmarket Ontario,Canada
Special Projects and Technical Support

Offline Mink

  • Forum GURU
  • *
  • Posts: 57
  • Aviation Enthusiast
  • First Name: Kresimir
  • Home Location: ETNN near Cologne, Germany
Re: Aerosoft Australia Strikes Again!
« Reply #7 on: October 29, 2011, 01:02:43 PM »
Version 3.2 out  ;D

Offline bnepethomas

  • Forum GURU
  • *
  • Posts: 23
  • Aviation Tragic
  • First Name: Peter Thomas
Re: Aerosoft Australia Strikes Again!
« Reply #8 on: October 29, 2011, 05:11:26 PM »
Thanks guys will give it a go.

cheers

Peter

Offline Mink

  • Forum GURU
  • *
  • Posts: 57
  • Aviation Enthusiast
  • First Name: Kresimir
  • Home Location: ETNN near Cologne, Germany
Re: Aerosoft Australia Strikes Again!
« Reply #9 on: October 30, 2011, 05:47:20 AM »
Helleo Peter!
Just a question, are you runung your aerosoft avionic suite in a network envirement?
If so i is important that the cdu is in the same pc attaccheh that shows the pfd and nd.  the nd,pfd snd cdu must be the same aeroavionic (green desktop smbol).

my setup-  pc 1 aeroserver, avionhHIc, lower and upper eicas, standby ec

pc 2, pfd, nd cdu (through touchscreen)

Hope you understand it.

Greetigs Kresimir
« Last Edit: October 30, 2011, 06:35:12 AM by Mink »

Offline spencerc19

  • CockpitBuilder
  • *
  • Posts: 1
  • Aviation Enthusiast
  • First Name: Spencer
  • Home Location: Coventry
Re: Aerosoft Australia Strikes Again!
« Reply #10 on: January 18, 2019, 09:10:41 AM »
Brilliant Software!
« Last Edit: January 18, 2019, 09:48:55 AM by spencerc19 »

 

COUNTDOWN TO WF2019


WORLDFLIGHT TEAM USA

Will Depart in...

Recent Posts

Korry 318 gets hot.
by KyleH
[July 15, 2019, 07:49:07 PM]
What have you done for your simulator today?
by blueskydriver
[July 14, 2019, 10:25:43 AM]
Flyengravity desktop MIP
by Steenos
[July 13, 2019, 07:39:33 PM]
Where to find or how to make this switch guard?
by blueskydriver
[July 13, 2019, 03:46:30 AM]
NIB 747-400 ThrottleTek + FDS CDUs x2 [SOLD]
by blueskydriver
[July 12, 2019, 10:53:12 PM]
Flight deck solutions FDS-B737NG-PRO-MX- rudder pedal
by ifeliciano
[July 11, 2019, 11:55:34 PM]
FDS 5V IBL Dimmer and Expansion Board / Pokeys 57E (SOLD)
by fsaviator
[July 10, 2019, 08:35:14 PM]
PM MCP.ini Question...
by ScottThePilot
[July 10, 2019, 12:56:38 PM]
Stab Trim Indicator...
by ScottThePilot
[July 09, 2019, 12:56:42 PM]
Boeing 737 Dual Linked Yokes
by tennyson
[July 09, 2019, 09:08:31 AM]
Teensy LC Throttle Quadrant
by kurt-olsson
[July 08, 2019, 08:09:41 AM]
Multiple Teensys, sketch upload question
by kurt-olsson
[July 08, 2019, 08:05:27 AM]
Anders Simparts - Summer info
by archen
[July 07, 2019, 03:30:31 AM]
737-800 Arduino X-Plane Build
by kurt-olsson
[July 04, 2019, 05:26:30 PM]
Group buy - Oshino OL-2405BP lamps - interested?
by kattz
[July 03, 2019, 09:26:22 PM]
Prosim737 Ver 2 license for sale
by ifeliciano
[July 02, 2019, 09:58:37 AM]
Anyone have this connector and possibly a clamp as well for the yoke?
by mickc
[July 01, 2019, 08:01:04 PM]
Happy Canada Day
by jackpilot
[July 01, 2019, 10:09:40 AM]
MH 370 Article
by FredK
[June 30, 2019, 07:28:41 PM]
Calling any B747 mechs... please help
by kattz
[June 30, 2019, 06:08:50 PM]
International shipping?
by jackpilot
[June 27, 2019, 08:29:07 AM]
Flooring Installed!
by jackpilot
[June 25, 2019, 05:49:57 PM]
How much room between center pedestal and seat?
by jackpilot
[June 25, 2019, 08:19:42 AM]
2020 Microsoft Flight Simulator - new at E3 2019
by blueskydriver
[June 24, 2019, 02:29:16 PM]
How to install DZUS fasteners?
by Buster99
[June 22, 2019, 04:12:34 PM]
Desert Air Spares - Trustworthy?
by kattz
[June 22, 2019, 12:40:51 PM]
Wanted - 737 Audio Panels - OEM
by jackpilot
[June 20, 2019, 12:26:51 PM]
Throttletek 737 Throttle For Sale
by kevinsayre
[June 19, 2019, 03:57:33 PM]
For sale - rudder pedals and linkages - SOLD - thanks, Craig!
by Caflyt
[June 19, 2019, 07:49:14 AM]
737 Throttle Conversion OC + ProSim
by kattz
[June 16, 2019, 11:39:03 AM]