Cockpit

* User Profile

Welcome, Guest. Please login or register.

Login with username, password and session length

Who's Online

  • *Users: 0
  • *Guests: 57
  • *Total: 57

FlightSimExpo 2018

Our Discord

Author Topic: 757 TQ wiring  (Read 4776 times)

Offline jackpilot

  • Moderator
  • I am chained to this website!
  • *
  • Posts: 3,920
  • Karma: +38/-0
  • 737-800 Sim-Avionics/Full Cockpit FDS + OEM P3D V4
  • First Name: Jack
  • Home Location: Montreal / Canada
Re: 757 TQ wiring
« Reply #25 on: May 09, 2017, 08:10:25 AM »
Precious info even if this logic is of limited use in our simulation softs.
Just one (more) question, which will help interfacing:
The reversers levers are
 1) Full forward (no action) switch closed
 2) Pulled backwards to mid position (cam lock) (switch opens)
 3) Can be pulled full backwards (switch still open)

What's happening on the real plane ?
1) Stowed
2) Deployed
3) proportional thrust ?





Jack

Offline tomenglish2000

  • Forum GURU
  • *
  • Posts: 17
  • Karma: +0/-0
  • Aviation Enthusiast
  • First Name: Tom
  • Home Location: Stafford
Re: 757 TQ wiring
« Reply #26 on: May 09, 2017, 08:59:22 AM »
Hi Jack,

Thats right.

The reverse levers fully down and the forward levers fully back is forward idle.

The reverse levers up to the first detent is reverse idle. This activates the switch which if all the conditions are met tells the reverse doors to open. The engine remains at idle thrust. The reverse lever is prevented from raising past reverse idle until both reverser halves reach at least 60% of full travel, the interlock then releases the lever. The reverse lever can now be raised up to full reverse, this just controls how much thrust the engine produces.

Then the process is reversed. Moving the levers to reverse idle from full reverse (or an intermediate position) does nothing. Moving the levers to fwd idle commands the reverser halves to stow.

There is no interlock to prevent the fwd levers being applied while the reverser halves are still deployed.

Figures above quoted for CFM engine with EEC.

Thanks.
Tom.

Offline bernard S

  • Forum GURU
  • *
  • Posts: 400
  • Karma: +0/-2
  • Aviation Enthusiast
  • First Name: Bernard
  • Home Location: Austin TX
Re: 757 TQ wiring
« Reply #27 on: May 09, 2017, 09:00:46 AM »
as in the pm i sent you ????  if you are wanting full interoperability per the aircraft you will require the thrust reverser interlocking actuators and some sort of clutch try to source the P box for such it may make it easier .. I do not know if your software supports such beasts in my 74 I have full TQ function so you may have to write some sort of add on wish i could be of more help but my 73 75 76 knowledge is strictly limited  to basics  those basics being  push fwd  it goes faster pull back it goes slower

Offline Garys

  • Forum GURU
  • *
  • Posts: 388
  • Karma: +3/-1
  • First Name: Gary
  • Home Location: Canada
Re: 757 TQ wiring
« Reply #28 on: May 09, 2017, 07:16:45 PM »
"Then the process is reversed. Moving the levers to reverse idle from full reverse (or an intermediate position) does nothing. Moving the levers to fwd idle commands the reverser halves to stow.

There is no interlock to prevent the fwd levers being applied while the reverser halves are still deployed"


Actually there in an interlock that will inhibit the fwd motion of the levers until the reverser sleeves are completely stowed.  That means the reverse thrust levers have to be fully down and the amber REV on the Engine display must be out before the system will allow you to move the throttles fwd. Also the same when applying reverse thrust. When you move the reverse handles to the idle position the reverser sleeves must be in fully deployed position and you must wait until the REV goes from amber to green on the engine display before the interlock will allow you to move the handles up to full reverse position.


Offline tomenglish2000

  • Forum GURU
  • *
  • Posts: 17
  • Karma: +0/-0
  • Aviation Enthusiast
  • First Name: Tom
  • Home Location: Stafford
Re: 757 TQ wiring
« Reply #29 on: May 10, 2017, 04:06:37 AM »
Hi Gary,

Thanks for that. I was in two minds about posting that about the lack of a forward interlock, I couldn't find it in the books so thought it didn't exist. Maybe I was looking in the wrong section. It didn't make sense to me though.

Do you know how "closed" the reverser sleeves have to be to remove the interlock? On the CFMs with EEC the reverse interlock is removed at 60% of reverser sleeves movement.

Thanks.
Tom.

Offline Garys

  • Forum GURU
  • *
  • Posts: 388
  • Karma: +3/-1
  • First Name: Gary
  • Home Location: Canada
Re: 757 TQ wiring
« Reply #30 on: May 10, 2017, 04:48:00 AM »
They need to be fully stowed. If the translating sleeves are in transit the interlocks are engaged.

What model CFM engine do you have the notes on?

 

Offline tomenglish2000

  • Forum GURU
  • *
  • Posts: 17
  • Karma: +0/-0
  • Aviation Enthusiast
  • First Name: Tom
  • Home Location: Stafford
Re: 757 TQ wiring
« Reply #31 on: May 10, 2017, 05:02:12 AM »
Hi Gary,

It's a CF6-80C Series. The AMM says that once the sleeves are open 60% of full travel the reverse interlock disengages. Thats for EEC controlled engines. The EEC will then (proportionally?) limit the reverse thrust until open. For non-EEC controlled engines (doubt there are many around these days) the interlock disengages proportionally between 76% to 95% of the full travel.

I don't have any information on other engine types.

Tom.

Offline Garys

  • Forum GURU
  • *
  • Posts: 388
  • Karma: +3/-1
  • First Name: Gary
  • Home Location: Canada
Re: 757 TQ wiring
« Reply #32 on: May 11, 2017, 01:11:55 AM »
That makes sense for the CF6 as the Central Drive Unit is air driven by aircraft pneumatics. On PMC (Cables) CF6 engines the interlocks are in the pylons. Fadec version of the CF6 has the interlocks in the throttle quadrant. Both types have EEC but on the PMC type the EEC is supervisory only.
« Last Edit: May 11, 2017, 01:19:34 AM by Garys »

Offline jackpilot

  • Moderator
  • I am chained to this website!
  • *
  • Posts: 3,920
  • Karma: +38/-0
  • 737-800 Sim-Avionics/Full Cockpit FDS + OEM P3D V4
  • First Name: Jack
  • Home Location: Montreal / Canada
Re: 757 TQ wiring
« Reply #33 on: May 11, 2017, 02:25:48 PM »
Are you Guys talking about the 757 or the 737 ?    ???


Jack

Offline Garys

  • Forum GURU
  • *
  • Posts: 388
  • Karma: +3/-1
  • First Name: Gary
  • Home Location: Canada
Re: 757 TQ wiring
« Reply #34 on: May 11, 2017, 07:00:19 PM »
I was originally talking of the 757. The GE CF6 engine that Tom was talking about is the for the 767.  The throttle quadrant is pretty much identical including the switches that you wanted info on and how it worked on the aircraft. There are slight differences between the aircraft when the interlocks engage/disengage but the thrust reverse sleeves move so fast that you don't really see much of a delay unless your specifically looking for one.

Cheers
Gary

 

COUNTDOWN TO WF2018


WORLDFLIGHT TEAM USA

Will Depart in...

Recent Posts

JetMax Overhead Support
by amorealex
[Today at 10:00:23 AM]
AIRBUS-A-310-SERIES-FMC/CDU FOR SALE
by N606DL
[Today at 06:54:26 AM]
For Sale GoFlight Jet Console, 2 Private Pilot Racks all with GoFlight Modules.
by blueskydriver
[Today at 03:27:09 AM]
For Sale-Real Cockpit Gauges...
by blueskydriver
[Today at 03:24:59 AM]
Two Cockpits For Sale
by blueskydriver
[Today at 03:21:12 AM]
B737-800 nose pitching up too much during take-off run
by Lee737
[May 22, 2018, 09:49:50 PM]
PMDG 737 on P3dV4 and 1PC Setup
by seedosip
[May 22, 2018, 10:21:40 AM]
FDS 747 MIP Price reduced!
by 777 driver
[May 21, 2018, 10:03:40 PM]
F-18 cockpit(s) for sale
by SAMEtech
[May 21, 2018, 06:43:50 PM]
MH-60 Helicopter (retired Navy simulator) for sale
by SAMEtech
[May 21, 2018, 06:42:22 PM]
Faceplates for instruments
by ifeliciano
[May 19, 2018, 04:01:07 PM]
Homebuilt TQ has been sold
by Maurice
[May 18, 2018, 04:18:29 PM]
Wanted: Boeing 737 Throttle
by jackpilot
[May 18, 2018, 03:35:46 PM]
What have you done for your simulator today?
by jackpilot
[May 18, 2018, 09:23:59 AM]
TQ 737 Jet Max for sale
by pilota1748
[May 18, 2018, 07:29:52 AM]
Inclinometer
by Atomic_Sheep
[May 18, 2018, 04:55:33 AM]
Join me on Vatsim Tonight
by Trevor Hale
[May 17, 2018, 06:10:56 PM]
Hola from Spain
by seedosip
[May 17, 2018, 05:36:44 AM]
Gas strut newton for elevation
by kurt-olsson
[May 16, 2018, 03:44:25 PM]
Vendor Questions
by Trevor Hale
[May 16, 2018, 03:20:56 PM]
Another AC/DC Panel dimenssion request
by bernard S
[May 16, 2018, 12:23:58 PM]
Mickey's Flightdeck - A Boeing 737-800 Cockpit on Youtube
by seedosip
[May 16, 2018, 05:10:28 AM]
New member - new topic - Hagstrom KEUSB 108 - windows 7 problem
by sedge
[May 14, 2018, 10:34:35 PM]
Purchased: Real Boeing 737 TQ
by Steenos
[May 14, 2018, 03:20:34 PM]
U.S. holiday booked!
by Aerosim Solutions
[May 13, 2018, 06:20:31 PM]
My Cockpit homemade - Brasil
by HighTechGG
[May 12, 2018, 12:33:05 PM]
FlightControlReplay Professional Edition v4 Features Announcement
by karijno
[May 11, 2018, 06:29:27 PM]
B767 MIP
by Goodenough
[May 11, 2018, 05:13:28 PM]
a must have
by bernard S
[May 11, 2018, 04:41:45 PM]
Great pic of 737 over Tampa
by fsaviator
[May 11, 2018, 09:22:55 AM]