Cockpit

* User Profile

Welcome, Guest. Please login or register.

Login with username, password and session length

Who's Online

  • *Users: 1
  • *Guests: 44
  • *Total: 45

Our Discord

Author Topic: What have you done for your simulator today?  (Read 20714 times)

Offline kurt-olsson

  • I spend way too much on this forum!
  • *
  • Posts: 866
  • Karma: +0/-0
  • 737 -mixed year OEM panel builder.
  • First Name: Peter
  • Home Location: Gothenburg
Re: What have you done for your simulator today?
« Reply #250 on: June 02, 2018, 05:09:16 PM »
BOOM!!!!

I AM BACK! Today i made the roof structure! check my build thread for pics!!!

Offline Marco ERJ

  • Forum GURU
  • *
  • Posts: 37
  • Karma: +0/-0
  • Aviation Enthusiast
  • First Name: Marco
  • Home Location: KCVG
Re: What have you done for your simulator today?
« Reply #251 on: June 08, 2018, 10:21:45 PM »
Nice work, Peter! Glad to see you've renewed your enthusiasm!

On my side, almost finished with the makeshift shell I've been building to help me with the wiring and interfacing (and hopefuly some interim flying as well someday!!).
Behold! IKEA flat pack meets ERJ bits and pieces. Talk about strange brew! Now, need to add the glareshield structure. Then, it's taking the whole thing apart and moving it to the basement...wha-wah... ::)
But I must say - being OCD like most of us here - that it took everything in me to not over-engineer the thing and get over the box-factor.
Whomever be afraid of ever building a sim, take heed: it is a lot harder NOT to build!!!  :D

Offline kurt-olsson

  • I spend way too much on this forum!
  • *
  • Posts: 866
  • Karma: +0/-0
  • 737 -mixed year OEM panel builder.
  • First Name: Peter
  • Home Location: Gothenburg
Re: What have you done for your simulator today?
« Reply #252 on: June 10, 2018, 04:53:03 PM »
My passion has returned and i have redone my cockpit structure. Talked to a carpenter today and he laught when i asked if it could hold 30-45kg of weight of the overhead panels.

Thats a good sign, he thought 150kg easily.

When i have removed the metal casing and not needed cards i hope to get the two overhead panels down to 25kg.

Offline blueskydriver

  • I am chained to this website!
  • *
  • Posts: 1,642
  • Karma: +4/-1
  • FSX/FS9 PM, PMDG737-700, FDSMIP/Overhead.etc
  • First Name: John
  • Home Location: WI
Re: What have you done for your simulator today?
« Reply #253 on: June 14, 2018, 12:32:08 PM »
AMAZING WORK GUYS!

Everyone just totally amazes me with their progress, I totally love this thread, as it keeps me motivated! Speaking of which, I took my FWD Overhead out at 2AM this morning. Talk about a plate of overcooked noodles...wires everywhere...OMG! What was I thinking back then?

Funny how everything can go in nice and pretty, but coming out it's a "Nightmare On Elm Street" with Freddy sitting next to me clinging his razor sharp blades, just saying "CUT THEM, CUT THEM ALL" with his evil laugh... I did not listen to him, no cutting whatsoever, just a big pile of wires though and he keeps laughing!

Keep posting guys, this is a great thread!

John
| FSX | FDS-MIP OVRHD SYS CARDS FC1| PM | PMDG 737-700 | UTX | GEX | UT7 | ASE | REX2 | AES | TSR | IS | TOPCAT | AvilaSoft EFB | OC CARDS & OVRHD GAUGES| SIMKITS | SW 3D Lights | FS2CREW2010 | FSXPassengers | Flight1 AE | MATROX TH2GO-D | NTHUSIM | 3-Mits EW230Ust Proj |

Offline kurt-olsson

  • I spend way too much on this forum!
  • *
  • Posts: 866
  • Karma: +0/-0
  • 737 -mixed year OEM panel builder.
  • First Name: Peter
  • Home Location: Gothenburg
Re: What have you done for your simulator today?
« Reply #254 on: June 14, 2018, 01:53:49 PM »
Haha John, i know this feeling! I have redone my MCP 6-8 times and when i look at it today i think: ”What the hell is this S*IT” But that means i am still learning and getting better and better at this craft! :)

Offline RayS

  • I spend way too much on this forum!
  • *
  • Posts: 730
  • Karma: +0/-0
  • Private Pilot, Sim Enthusiast
    • Anthony Scott Photography
  • First Name: Ray Sotkiewicz
  • Home Location: Seattle, WA
Re: What have you done for your simulator today?
« Reply #255 on: June 15, 2018, 01:04:19 PM »
I love those sim moments when I look at past work and wonder just what the heck I was thinking...

A few days ago I rebuilt the radio bay center console. The last version had accommodations for multiple-width radios and panels. Seemed like a good idea on the chalkboard but it became more of a pain to deal with. Now it's a single row, 5.75 inches wide and looks great.

I even painted the inside lime green, so the MDF doesn't oxidize.  :laugh:
Ray Sotkiewicz

Offline jackpilot

  • Moderator
  • I am chained to this website!
  • *
  • Posts: 3,959
  • Karma: +38/-0
  • 737-800 Sim-Avionics/Full Cockpit FDS + OEM P3D V4
  • First Name: Jack
  • Home Location: Montreal / Canada
Re: What have you done for your simulator today?
« Reply #256 on: June 15, 2018, 06:02:42 PM »
You mean the usual OEM  "Baby Poop" green !  :D


Jack

Offline bernard S

  • Forum GURU
  • *
  • Posts: 408
  • Karma: +0/-2
  • Aviation Enthusiast
  • First Name: Bernard
  • Home Location: Austin TX
Re: What have you done for your simulator today?
« Reply #257 on: June 19, 2018, 05:54:23 PM »
moved

Offline jackpilot

  • Moderator
  • I am chained to this website!
  • *
  • Posts: 3,959
  • Karma: +38/-0
  • 737-800 Sim-Avionics/Full Cockpit FDS + OEM P3D V4
  • First Name: Jack
  • Home Location: Montreal / Canada
Re: What have you done for your simulator today?
« Reply #258 on: June 19, 2018, 08:01:55 PM »
Ah Ah...moving at night!!! ::)

Just Jokin'
From where to where ?


Jack

Offline bernard S

  • Forum GURU
  • *
  • Posts: 408
  • Karma: +0/-2
  • Aviation Enthusiast
  • First Name: Bernard
  • Home Location: Austin TX
Re: What have you done for your simulator today?
« Reply #259 on: June 20, 2018, 09:43:17 AM »
lakeway to lakeway   into its own design and build ..building    eas fun ...   police escorts x6  stopping traffic and closing out intersections etc   .. want big boy toys requires big boy effort

Offline jackpilot

  • Moderator
  • I am chained to this website!
  • *
  • Posts: 3,959
  • Karma: +38/-0
  • 737-800 Sim-Avionics/Full Cockpit FDS + OEM P3D V4
  • First Name: Jack
  • Home Location: Montreal / Canada
Re: What have you done for your simulator today?
« Reply #260 on: June 20, 2018, 10:17:49 AM »
You bet !
Have to pay you a visit  :laugh:


Jack

Offline blueskydriver

  • I am chained to this website!
  • *
  • Posts: 1,642
  • Karma: +4/-1
  • FSX/FS9 PM, PMDG737-700, FDSMIP/Overhead.etc
  • First Name: John
  • Home Location: WI
Re: What have you done for your simulator today?
« Reply #261 on: June 20, 2018, 02:04:03 PM »
Hi Bernard,

DAAAMMMNN, when you go big, you go big! So, is that hanger yours, did you have it built, or are you renting space again?

Do you want to send that truck for the B727 shell now? It's stripped out on the inside, but you could cut the back section off and make it a B737 shell. Plus, price is only whatever the going salvage rate price per pound is...$1,000 to $1,500 range, if that.

Or, send the moving trucks for Karen and myself, as your hanger is big enough to live in...lol! Just curious, what size is it?

Lastly, are there any VA hospitals or VA CBOC's nearby? In case your or my moving trucks do show up someday, Karen needs a job to PCS/transfer into. You're still in Texas right?

I've always told her that someday we would move there. I spent some time there as a kid and loved it. Plus, with age and disabilities, the Wisconsin winter weather is getting harder every second/minute/hour/day/week/month/year...you get my point right...lol!

Kind Regards,

John
| FSX | FDS-MIP OVRHD SYS CARDS FC1| PM | PMDG 737-700 | UTX | GEX | UT7 | ASE | REX2 | AES | TSR | IS | TOPCAT | AvilaSoft EFB | OC CARDS & OVRHD GAUGES| SIMKITS | SW 3D Lights | FS2CREW2010 | FSXPassengers | Flight1 AE | MATROX TH2GO-D | NTHUSIM | 3-Mits EW230Ust Proj |

Offline blueskydriver

  • I am chained to this website!
  • *
  • Posts: 1,642
  • Karma: +4/-1
  • FSX/FS9 PM, PMDG737-700, FDSMIP/Overhead.etc
  • First Name: John
  • Home Location: WI
Re: What have you done for your simulator today?
« Reply #262 on: June 20, 2018, 02:06:09 PM »
Hey Jack,

Post those new "I can see clearly now, the rain is gone!" pics...lol! Show how you mounted them in your FDS shell  :idiot:

John
| FSX | FDS-MIP OVRHD SYS CARDS FC1| PM | PMDG 737-700 | UTX | GEX | UT7 | ASE | REX2 | AES | TSR | IS | TOPCAT | AvilaSoft EFB | OC CARDS & OVRHD GAUGES| SIMKITS | SW 3D Lights | FS2CREW2010 | FSXPassengers | Flight1 AE | MATROX TH2GO-D | NTHUSIM | 3-Mits EW230Ust Proj |

Offline jackpilot

  • Moderator
  • I am chained to this website!
  • *
  • Posts: 3,959
  • Karma: +38/-0
  • 737-800 Sim-Avionics/Full Cockpit FDS + OEM P3D V4
  • First Name: Jack
  • Home Location: Montreal / Canada
Re: What have you done for your simulator today?
« Reply #263 on: June 20, 2018, 04:39:37 PM »
OK here they are:
OEMs from John

Nice eye candy but adds to immersion





Jack

Offline Marco ERJ

  • Forum GURU
  • *
  • Posts: 37
  • Karma: +0/-0
  • Aviation Enthusiast
  • First Name: Marco
  • Home Location: KCVG
Re: What have you done for your simulator today?
« Reply #264 on: June 22, 2018, 01:12:07 AM »
Went to fit the MIP and the glareshield to the temporary shell/ base. Found out that the center post structure I had built was too flimsy and had given an inch or so when I first assembled the overhead shell. The result? Had to take apart almost the whole darn thing, shore-up the center columns and center windshield post so that the lower end of the overhead, the glare shield and - by association - the MIP all sit at the correct height - and the center pedestal can be mounted in!
Four hours of work, but it paid off...
I just wonder what’s gonna happen when I take it apart and move it to the basement, then try to assemble it all over again...yes, I may be a glutton for punishment...
Marco

Offline kurt-olsson

  • I spend way too much on this forum!
  • *
  • Posts: 866
  • Karma: +0/-0
  • 737 -mixed year OEM panel builder.
  • First Name: Peter
  • Home Location: Gothenburg
Re: What have you done for your simulator today?
« Reply #265 on: June 22, 2018, 03:05:27 AM »
Jeeez Marco! Great job, and fast! Nice to have the base setup!

Offline Marco ERJ

  • Forum GURU
  • *
  • Posts: 37
  • Karma: +0/-0
  • Aviation Enthusiast
  • First Name: Marco
  • Home Location: KCVG
Re: What have you done for your simulator today?
« Reply #266 on: June 22, 2018, 08:01:24 AM »
Thanks Peter! Yeah, it feels good to get something going,  to see it take shape.

Offline 737NGer

  • Forum GURU
  • *
  • Posts: 182
  • Karma: +0/-0
  • Aviation Enthusiast
  • First Name: Youssef
  • Home Location: Cairo
Re: What have you done for your simulator today?
« Reply #267 on: June 22, 2018, 01:16:18 PM »
lakeway to lakeway   into its own design and build ..building    eas fun ...   police escorts x6  stopping traffic and closing out intersections etc   .. want big boy toys requires big boy effort

Would it work the same if you're transporting just a shell, without anything else to go with it?

Offline bernard S

  • Forum GURU
  • *
  • Posts: 408
  • Karma: +0/-2
  • Aviation Enthusiast
  • First Name: Bernard
  • Home Location: Austin TX
Re: What have you done for your simulator today?
« Reply #268 on: June 24, 2018, 11:08:26 AM »
i do not know i guess it depends on your city restrictions ..

Offline RayS

  • I spend way too much on this forum!
  • *
  • Posts: 730
  • Karma: +0/-0
  • Private Pilot, Sim Enthusiast
    • Anthony Scott Photography
  • First Name: Ray Sotkiewicz
  • Home Location: Seattle, WA
Re: What have you done for your simulator today?
« Reply #269 on: June 28, 2018, 02:33:22 AM »
Not much work on the sim, but a lot of work on its new home. Great friend came over during the weekend to help me hang insulation.

Also picked up a decent server rack, 1U monitor drawer with monitor, and a rack mount APC power conditioner.  All new electrical, floor is getting the royal treatment too.

However I spent tonight installing an attic ladder. Not fun.

« Last Edit: June 28, 2018, 02:37:42 AM by RayS »
Ray Sotkiewicz

Offline blueskydriver

  • I am chained to this website!
  • *
  • Posts: 1,642
  • Karma: +4/-1
  • FSX/FS9 PM, PMDG737-700, FDSMIP/Overhead.etc
  • First Name: John
  • Home Location: WI
Re: What have you done for your simulator today?
« Reply #270 on: June 28, 2018, 11:28:12 AM »
Hey Ray, "Got Pics?!"...lol.
| FSX | FDS-MIP OVRHD SYS CARDS FC1| PM | PMDG 737-700 | UTX | GEX | UT7 | ASE | REX2 | AES | TSR | IS | TOPCAT | AvilaSoft EFB | OC CARDS & OVRHD GAUGES| SIMKITS | SW 3D Lights | FS2CREW2010 | FSXPassengers | Flight1 AE | MATROX TH2GO-D | NTHUSIM | 3-Mits EW230Ust Proj |

Offline RayS

  • I spend way too much on this forum!
  • *
  • Posts: 730
  • Karma: +0/-0
  • Private Pilot, Sim Enthusiast
    • Anthony Scott Photography
  • First Name: Ray Sotkiewicz
  • Home Location: Seattle, WA
Re: What have you done for your simulator today?
« Reply #271 on: June 28, 2018, 08:03:53 PM »
Hopefully this works. I've been unable to post pics now for several days...

http://www.scottshangar.net/b190/haf7a0461#haf7a0461
Ray Sotkiewicz

Offline jackpilot

  • Moderator
  • I am chained to this website!
  • *
  • Posts: 3,959
  • Karma: +38/-0
  • 737-800 Sim-Avionics/Full Cockpit FDS + OEM P3D V4
  • First Name: Jack
  • Home Location: Montreal / Canada
Re: What have you done for your simulator today?
« Reply #272 on: June 28, 2018, 08:34:58 PM »
Where did you get that Chemtrail control Panel...want one !!!! :D


Jack

Offline Aerosim Solutions

  • I may as well be Staff!
  • *
  • Posts: 690
  • Karma: +5/-0
  • Simulator part supplier
    • Aerosim Solutions
  • First Name: Gwyn Perrett
  • Home Location: Perth, Western Australia
Re: What have you done for your simulator today?
« Reply #273 on: June 29, 2018, 01:04:49 AM »
Not exactly today but over the last week I have converted my sim to 64bit. P3Dv4.2 and Prosim 2. I've been avoiding the switch for quite a while because I wanted to sit back and see how everyone else went with it first. My mate and fellow member Ken Brand talked me into having a crack at the upgrade so we did! We decided to leave the original PC drives untouched and we fitted a 1TB SSD on a different tray, loaded Windows 7 on this and basically started loading the software and programs like a new PC so if anything went wrong we could plug the old drives back in and restore how it was. We can still do that of course but I think the new set up is going well and I don't think there will be a need to go back to the 32bit sim, it's still good to have it there as a back up though I guess. P3Dv4.2 and Prosim 2 loaded fine and we managed to import the Immersive Display warping configuration successfully to restore the display system. Prosim 2 is vastly improved and a really good feature is the ability to program the flight controls, throttle, brakes and tiller all within Prosim, no FSUIPC required. All the analogue inputs were assigned and calibrated in about 20 minutes and we went for a fly. The Prosim 2 flight model and sound set are great. The team at Prosim certainly know how to make things easy. With help from my Worldflight crewmates we managed to restore Prosim Utils, ACARS, ACARS printer, Navigraph, PFPX, TOPCAT and a fresh install of ActiveSky for P3Dv4. I've reloaded about 40% of my add-on sceneries so there's still a lot to do. The Buttkickers aren't working but that should be a quick fix and this weekend I'll be attempting to get Prosim to drive the Auto TQ - fingers crossed!
First impressions of P3Dv4 and Prosim 2 are wow! I can't see a huge improvement in frame rates but it is definitely smoother and doesn't seem to be stuttering, VOZ738 has had a successful heart transplant!!
Boeing 737NG using Prepar3D v3.35, Prosim737, FDS SYS cards, FDS CDUs, CP Flight EL MCP & EFIS & Aerosim Solutions hardware of course!
Check out my website here -
http://www.aerosimsolutions.com.au

Offline RayS

  • I spend way too much on this forum!
  • *
  • Posts: 730
  • Karma: +0/-0
  • Private Pilot, Sim Enthusiast
    • Anthony Scott Photography
  • First Name: Ray Sotkiewicz
  • Home Location: Seattle, WA
Re: What have you done for your simulator today?
« Reply #274 on: June 29, 2018, 01:15:37 AM »
All of my custom panels come from the good folks at Ruscool Electronics. They've done several panels for me but thought they might have a bit of fun with that one. When the Beech is alive in the new hangar, I've another sim pilot lined up and we're going to do one of those "Government Instructional" videos.

https://www.youtube.com/watch?v=n-vkicKiZg4
Ray Sotkiewicz

 

COUNTDOWN TO WF2018


WORLDFLIGHT TEAM USA

Will Depart in...

Recent Posts

Move Project Magenta From FSX to P3D Full cockpit
by ScottThePilot
[July 16, 2018, 10:25:24 PM]
737-800 Arduino X-Plane Build
by kurt-olsson
[July 16, 2018, 02:46:05 PM]
How to turn all MIP LCDs on at once?
by jackpilot
[July 16, 2018, 01:17:53 PM]
SOLD!! Real Aircraft Cannon Plugs
by bernard S
[July 16, 2018, 11:14:56 AM]
FlightControlReplay v4 OUT NOW (with also Re-Live and Video Render features!)
by karijno
[July 16, 2018, 08:00:12 AM]
Software Interface
by Bob Reed
[July 15, 2018, 07:42:31 AM]
Looking for this!!
by Caflyt
[July 14, 2018, 10:35:37 AM]
For Sale GoFlight Jet Console, 2 Private Pilot Racks all with GoFlight Modules.
by blueskydriver
[July 14, 2018, 06:32:03 AM]
ACE - Officially buyer beware
by fordgt40
[July 14, 2018, 05:00:33 AM]
737NG Simulator DOWN!
by jmlohrenz
[July 13, 2018, 01:48:28 PM]
Two new 19" for my PDF and ND. Check before buy
by kurt-olsson
[July 11, 2018, 12:59:26 PM]
What have you done for your simulator today?
by RayS
[July 10, 2018, 01:57:31 AM]
Bought a FSC.IT Throttle on ebay (Question)
by iwik
[July 09, 2018, 04:45:50 PM]
Aerosoft MCP
by jackpilot
[July 09, 2018, 02:26:51 PM]
P3D WideView vs P3D SimConnect cleint/server configuration
by FredK
[July 09, 2018, 10:22:58 AM]
Post Your Pit!!!! 1000 Member Show and Tell
by Trevor Hale
[July 09, 2018, 09:40:59 AM]
3D printers
by Bob Reed
[July 08, 2018, 05:54:51 PM]
Boeing 737 OEM 4xAFDS, 3x CDU and 1 HUD with combiner and others
by fly_ebos
[July 08, 2018, 07:27:28 AM]
Wanted: ATC and ADF pedestal modules
by jmlohrenz
[July 06, 2018, 09:37:54 PM]
Trying to Source Garmin 430 Parts...
by RayS
[July 06, 2018, 08:24:39 PM]
737 parts for sale!
by Ed
[July 06, 2018, 07:29:31 AM]
737 Max
by sacrayton
[July 05, 2018, 04:04:14 PM]
P3D4.3 viewgroups
by Bob Reed
[July 05, 2018, 12:48:42 PM]
CPFLIGHT GEAR FOR SALE
by Mark737800
[July 04, 2018, 12:56:21 AM]
Labeling Buttons
by iwik
[July 03, 2018, 08:16:59 PM]
Potentiometer 10k 1,5 turns, where?
by kurt-olsson
[July 02, 2018, 06:05:38 PM]
Voice control
by luisgordo
[July 02, 2018, 01:24:07 PM]
JETMAX THROTTLE AND STAND FOR SALE
by jmdhwy
[July 02, 2018, 12:17:13 AM]
Opencockpits boards for sale
by pierclav
[July 01, 2018, 10:26:16 PM]
Left trim up/down wires OEM yoke
by kurt-olsson
[July 01, 2018, 03:23:05 PM]