Cockpit

* User Profile

Welcome, Guest. Please login or register.

Login with username, password and session length

Who's Online

  • *Users: 2
  • *Guests: 17
  • *Total: 19

Our Discord

Author Topic: SIOC Stepper Help  (Read 515 times)

Offline okansacli

  • CockpitBuilder
  • *
  • Posts: 6
  • Aviation Enthusiast
  • First Name: Okan
  • Home Location: LTBA
SIOC Stepper Help
« on: September 04, 2018, 12:31:02 AM »
Hello

I am building a wet compass with a step motor using the Open Cockpits Stepper Motor Card.

I have no issues with the SIOC code.

And I believe to have achieved the optical sensor working correctly (no needle in between +5vdc, needle in between 0vdc in the middle pin of the 3pin position group)


I can not seem to run the iostepper.exe correctly as always I see C.Motor1,2 and 3 to be 0 with a continousluy rotating step motor.


Any suggestions ? Did anyone else experience similar issues with open cockpit step motor calibration ?


Best Regard from Istanbul


Okan




Offline iwik

  • Forum GURU
  • *
  • Posts: 362
  • GA Jockey
  • First Name: Les
  • Home Location: Christchurch New Zealand
Re: SIOC Stepper Help
« Reply #1 on: September 04, 2018, 01:00:47 AM »
Okan,
The stepper motor should turn at power up. It should do two revolutions then stop. If it doesnt then the opto fedback is not working. Make sure you have enable the correct motor.
Also when it rotates short out the opto input to the board and it should stop.
Les

Offline okansacli

  • CockpitBuilder
  • *
  • Posts: 6
  • Aviation Enthusiast
  • First Name: Okan
  • Home Location: LTBA
Re: SIOC Stepper Help
« Reply #2 on: September 04, 2018, 02:38:31 AM »
Thank you for the feedback Les,

The stepper motor turns at power up and keeps on turning .. does not stop..

The opto feedback works (i asumme) such that the middle pin (the 3 pin position group) has +5v when the sensor is not blocked, when the sensor is blocked has 0 v.


How can I short our the opto input (shall I bridge pin 2 and pin 3) ?


What do you mean "make sure you enable the correct motor" ? please clarify


Best Regards
« Last Edit: September 04, 2018, 02:39:21 AM by okansacli »

Offline iwik

  • Forum GURU
  • *
  • Posts: 362
  • GA Jockey
  • First Name: Les
  • Home Location: Christchurch New Zealand
Re: SIOC Stepper Help
« Reply #3 on: September 04, 2018, 03:42:17 PM »
Hi,
Pin 1 is 0v and 3 is 5v. Just short pin 1 and 2 together and the motor should stop.
Make sure you  sc the correct pos input for the motor number you are using.
Sorry about the motor enable remark. That shouldnt matter.
I have made the mistake of sc the wrong pos input and wondered why. Just to make sure
try sc any of the motor position inputs. Dont get mixed up with the Analogue inputs on
the board.
Hope this helps.
Les

Offline okansacli

  • CockpitBuilder
  • *
  • Posts: 6
  • Aviation Enthusiast
  • First Name: Okan
  • Home Location: LTBA
Re: SIOC Stepper Help
« Reply #4 on: September 12, 2018, 10:00:11 AM »
the H21A1 type optical sensor was doing its job by switching the 5vdc to 0 vdc when there was an obstruction in between "without" connection to the OC Stepper cards. But when connected to the OC stepper position pins, the voltage drop was limited to ~2vdc instead of 0 vdc (somehow) which made the step connected to the OC stepper to keep on rotating.

So I have changed the optical sensor to LM393 based sensor and it works like a charm. (the sensor was available for audrino as a motor speed sensor)

So for those who plan to use OC stepper card, make sure that the optical position sensor is doing what it should do.

I have uploaded a video on my web site (okansacli.com) for those who are interested.

Best Regards from Istanbul

okan s.

 

FlightSimExpo 2019

FsExpo

COUNTDOWN TO WF2019


WORLDFLIGHT TEAM USA

Will Depart in...

Recent Posts

Looking for 737NG FDS Glareshield and wings
by Ed
[Today at 12:35:19 PM]
something different
by kurt-olsson
[Today at 07:09:10 AM]
FOR SALE: FDS Shell & Liners New for Sale
by p1080
[Today at 12:35:58 AM]
OEM 737-400 MIP frame and complete rudder pedal covers for sale
by navymustang
[March 24, 2019, 09:34:48 PM]
Wanted: 737 CDU
by Philip
[March 24, 2019, 07:17:58 PM]
Join me on Vatsim Tonight
by Trevor Hale
[March 24, 2019, 05:24:35 PM]
Assortment of Phidgets Cards for Sale
by kenrosefire
[March 24, 2019, 01:07:08 AM]
SLAVX Model 4 Panel For Sale
by kenrosefire
[March 24, 2019, 12:50:30 AM]
Complete 737-800 cockpit - moving sale
by Trevor Hale
[March 23, 2019, 11:10:21 AM]
Screen coming together
by jackpilot
[March 23, 2019, 10:11:50 AM]
Flight Scoring Platforms....
by bernard S
[March 22, 2019, 05:55:18 PM]
SALE! Airbus A320 trainer, located near Gatwick UK
by nic
[March 21, 2019, 09:35:58 PM]
Help with wiring up FDS map light
by Skysurfer170
[March 21, 2019, 02:36:03 PM]
Boeing 737-800 Next Generation Simulator
by blueskydriver
[March 21, 2019, 07:42:41 AM]
Great US switch supplier
by Bob Reed
[March 20, 2019, 09:21:11 PM]
Great video on a Caravelle project
by Lomaric
[March 20, 2019, 06:10:00 PM]
Holy Grail ?
by bernard S
[March 20, 2019, 06:05:06 PM]
737 MAX
by FredK
[March 19, 2019, 11:07:27 PM]
Sim Speaker System in a small package...
by sagrada737
[March 19, 2019, 01:32:30 PM]
Prosim and RSP TQ interfacing
by jfuenmayor
[March 18, 2019, 02:04:20 PM]
OEM 737 classic liners for sale RESERVED
by Gallie
[March 18, 2019, 09:54:39 AM]
B737-200 throttle quadrant for sale
by Gallie
[March 18, 2019, 08:56:25 AM]
What have you done for your simulator today?
by 757Simulator
[March 18, 2019, 04:20:49 AM]
JetMax TQ for Sale...
by sagrada737
[March 16, 2019, 02:57:19 PM]
Revolution Simproducts V2.0 Plug & Play Throttle help
by jfuenmayor
[March 14, 2019, 10:13:05 PM]
Attention All Members and Guests
by Trevor Hale
[March 13, 2019, 06:25:07 PM]
Creality CR-10S 3d printer.
by sagrada737
[March 12, 2019, 07:57:11 PM]
CPFlight EFIS737Pro2
by Lomaric
[March 11, 2019, 05:18:20 PM]
Homebuilt seats and a question
by Trevor Hale
[March 11, 2019, 01:32:17 PM]
777 Throttle - sold
by mattking247
[March 10, 2019, 07:13:29 PM]