Cockpit

* User Profile

Welcome, Guest. Please login or register.

Login with username, password and session length

Who's Online

  • *Users: 0
  • *Guests: 55
  • *Total: 55

Our Discord

Author Topic: John's List of 3D Printed Items for Flight Simulation  (Read 2494 times)

Offline blueskydriver

  • I am chained to this website!
  • *
  • Posts: 1,891
  • FSX/FS9 PM, PMDG737-700, FDSMIP/Overhead.etc
  • First Name: John
  • Home Location: WI
John's List of 3D Printed Items for Flight Simulation
« on: September 12, 2018, 04:23:20 AM »
Hey Everyone,

Currently, I am printing the Glareshield (MIP) Checklist Holder that Joe Lavery designed and once it's done I'll post the amended file if Joe doesn't mind or maybe he'll post it if he makes corrections for me.

In the past, I printed the Window Handles and Locking Plate objects that I got from Thingiverse. They turned out very nice and smooth; although, they seem smaller then what I've seen printed by others.

Beyond that I have printed some non-flight simulator items, like the sitting Baby Groot and the sample items that come with the CR-10S. So far, all my prints have turned out very nice; well, all but one and that was due to the item coming unglued or unattached from the plate. Thus, I must say that 3D printing is not difficult once you understand the basics and always remember to level your bed, add glue from Elmer's Glue Stick (if using tape and/or glue) and pre-heat the filament before every print...

Finally, I mentioned Thingiverse which is here: https://www.thingiverse.com/ and you really should check the site out even if you don't have a 3D printer. You'll find many objects that are free to download and print (non-commercial-cannot sell your prints). If you have questions about items to print send me a PM and I will help the best way I can...

John
« Last Edit: September 12, 2018, 05:04:15 AM by blueskydriver »
| FSX | FDS-MIP OVRHD SYS CARDS FC1| PM | PMDG 737-700 | UTX | GEX | UT7 | ASE | REX2 | AES | TSR | IS | TOPCAT | AvilaSoft EFB | OC CARDS & OVRHD GAUGES| SIMKITS | SW 3D Lights | FS2CREW2010 | FSXPassengers | Flight1 AE | MATROX TH2GO-D | NTHUSIM | 3-Mits EW230Ust Proj |

Offline blueskydriver

  • I am chained to this website!
  • *
  • Posts: 1,891
  • FSX/FS9 PM, PMDG737-700, FDSMIP/Overhead.etc
  • First Name: John
  • Home Location: WI
Re: John's List of 3D Printed Items for Flight Simulation
« Reply #1 on: September 12, 2018, 05:04:37 AM »
Not sure, but this is not showing up as a new recent post...?
« Last Edit: September 12, 2018, 05:05:26 AM by blueskydriver »
| FSX | FDS-MIP OVRHD SYS CARDS FC1| PM | PMDG 737-700 | UTX | GEX | UT7 | ASE | REX2 | AES | TSR | IS | TOPCAT | AvilaSoft EFB | OC CARDS & OVRHD GAUGES| SIMKITS | SW 3D Lights | FS2CREW2010 | FSXPassengers | Flight1 AE | MATROX TH2GO-D | NTHUSIM | 3-Mits EW230Ust Proj |

Offline blueskydriver

  • I am chained to this website!
  • *
  • Posts: 1,891
  • FSX/FS9 PM, PMDG737-700, FDSMIP/Overhead.etc
  • First Name: John
  • Home Location: WI
Re: John's List of 3D Printed Items for Flight Simulation
« Reply #2 on: September 12, 2018, 03:37:22 PM »
Here are two pics of the 3D printed Checklist Holder...

John
| FSX | FDS-MIP OVRHD SYS CARDS FC1| PM | PMDG 737-700 | UTX | GEX | UT7 | ASE | REX2 | AES | TSR | IS | TOPCAT | AvilaSoft EFB | OC CARDS & OVRHD GAUGES| SIMKITS | SW 3D Lights | FS2CREW2010 | FSXPassengers | Flight1 AE | MATROX TH2GO-D | NTHUSIM | 3-Mits EW230Ust Proj |

Offline blueskydriver

  • I am chained to this website!
  • *
  • Posts: 1,891
  • FSX/FS9 PM, PMDG737-700, FDSMIP/Overhead.etc
  • First Name: John
  • Home Location: WI
Re: John's List of 3D Printed Items for Flight Simulation
« Reply #3 on: September 12, 2018, 08:14:44 PM »
Recent posts test?
| FSX | FDS-MIP OVRHD SYS CARDS FC1| PM | PMDG 737-700 | UTX | GEX | UT7 | ASE | REX2 | AES | TSR | IS | TOPCAT | AvilaSoft EFB | OC CARDS & OVRHD GAUGES| SIMKITS | SW 3D Lights | FS2CREW2010 | FSXPassengers | Flight1 AE | MATROX TH2GO-D | NTHUSIM | 3-Mits EW230Ust Proj |

Offline blueskydriver

  • I am chained to this website!
  • *
  • Posts: 1,891
  • FSX/FS9 PM, PMDG737-700, FDSMIP/Overhead.etc
  • First Name: John
  • Home Location: WI
Re: John's List of 3D Printed Items for Flight Simulation
« Reply #4 on: September 13, 2018, 05:08:20 PM »
Hey Everyone,

Just wanted to get the discussion of my 3D prints here in the 3D Printing section. I am doing the Checklist Holder for Peter. Here is what I posted in the other thread:

For others who would like one printed, I cannot sell it for a profit since Joe designed this. However, if you pay for a spool of filament to cover my time printing it and the machine time of 10.5 hrs (includes wear and tear, plus electricity), I would make you one.

Also, if Joe decides to print them for others at a profit, I would not object, nor print his design.

And, you guys know Karen and me, we are a very honest couple...always  ;D

If you’re interested, please PM me.

John
| FSX | FDS-MIP OVRHD SYS CARDS FC1| PM | PMDG 737-700 | UTX | GEX | UT7 | ASE | REX2 | AES | TSR | IS | TOPCAT | AvilaSoft EFB | OC CARDS & OVRHD GAUGES| SIMKITS | SW 3D Lights | FS2CREW2010 | FSXPassengers | Flight1 AE | MATROX TH2GO-D | NTHUSIM | 3-Mits EW230Ust Proj |

Offline blueskydriver

  • I am chained to this website!
  • *
  • Posts: 1,891
  • FSX/FS9 PM, PMDG737-700, FDSMIP/Overhead.etc
  • First Name: John
  • Home Location: WI
Re: John's List of 3D Printed Items for Flight Simulation
« Reply #5 on: September 13, 2018, 11:19:39 PM »
Just wanted to add these pics here as well...

John
| FSX | FDS-MIP OVRHD SYS CARDS FC1| PM | PMDG 737-700 | UTX | GEX | UT7 | ASE | REX2 | AES | TSR | IS | TOPCAT | AvilaSoft EFB | OC CARDS & OVRHD GAUGES| SIMKITS | SW 3D Lights | FS2CREW2010 | FSXPassengers | Flight1 AE | MATROX TH2GO-D | NTHUSIM | 3-Mits EW230Ust Proj |

Offline blueskydriver

  • I am chained to this website!
  • *
  • Posts: 1,891
  • FSX/FS9 PM, PMDG737-700, FDSMIP/Overhead.etc
  • First Name: John
  • Home Location: WI
Re: John's List of 3D Printed Items for Flight Simulation
« Reply #6 on: September 13, 2018, 11:36:35 PM »
Hey Everyone,

Almost forgot, I will print the B737 Window Handles and Bracket pieces for others who want them if you supply the spool of grey filament. Although, these would take a bit longer to do, as well as the first set I did seem a tad small or maybe it's just me, either way I'm going to print a second set. So, once that's done I'll start printing them for others.

Additionally, I have my second printer almost together, so that will speed things up. If you want a set please PM me...the average costs for filament from Gear Best is $25-$30 range and I only buy one brand.

Therefore, either you buy the spool from them and have it shipped to me or send me the amount through PayPal, then I order it myself.

Please remember this is 3D printing and things will not look like the real metal ones in smoothness; however, I will do my best with it. Any sanding or painting is for you to do, but I don't think it needs it.

Best Regards,

John
| FSX | FDS-MIP OVRHD SYS CARDS FC1| PM | PMDG 737-700 | UTX | GEX | UT7 | ASE | REX2 | AES | TSR | IS | TOPCAT | AvilaSoft EFB | OC CARDS & OVRHD GAUGES| SIMKITS | SW 3D Lights | FS2CREW2010 | FSXPassengers | Flight1 AE | MATROX TH2GO-D | NTHUSIM | 3-Mits EW230Ust Proj |

Offline blueskydriver

  • I am chained to this website!
  • *
  • Posts: 1,891
  • FSX/FS9 PM, PMDG737-700, FDSMIP/Overhead.etc
  • First Name: John
  • Home Location: WI
Re: John's List of 3D Printed Items for Flight Simulation
« Reply #7 on: September 17, 2018, 10:13:04 AM »
Hey Everyone,

My next 3D printer trials will be the Map Holder and Cup Holder that goes on the sides of the B737 interior panels, if they turn out well, I will print them for others as a left set and right set for the same exchange of 1 CC Tree filament spool per set. Roughly about $25-30 per set and that is just for the materials, no profits.

In case anyone wants to know why I am doing it this way, it's so I can gain experience with printing for now. I can already do 3D models, but I rather do this in reverse without worrying about designing things yet.

If you're interested PM me...

John

PS I am ordering my 3rd Creality CR-10S 3D Printer and this time it'll be the CR-10S5 model that is 500x500x500 mm. Whereas, my current models are the CR-10S 300x300x400 mm. So, bigger printable items abound in the future... HOORAY!  :idiot:
| FSX | FDS-MIP OVRHD SYS CARDS FC1| PM | PMDG 737-700 | UTX | GEX | UT7 | ASE | REX2 | AES | TSR | IS | TOPCAT | AvilaSoft EFB | OC CARDS & OVRHD GAUGES| SIMKITS | SW 3D Lights | FS2CREW2010 | FSXPassengers | Flight1 AE | MATROX TH2GO-D | NTHUSIM | 3-Mits EW230Ust Proj |

Atomic_Sheep

  • Guest
Re: John's List of 3D Printed Items for Flight Simulation
« Reply #8 on: September 21, 2018, 02:10:46 AM »
Wow, that's super impressive!

Offline blueskydriver

  • I am chained to this website!
  • *
  • Posts: 1,891
  • FSX/FS9 PM, PMDG737-700, FDSMIP/Overhead.etc
  • First Name: John
  • Home Location: WI
Re: John's List of 3D Printed Items for Flight Simulation
« Reply #9 on: September 21, 2018, 09:19:24 PM »
Hi Dimitry,

I am glad you like it, but this is Joe's design and he gets all the credit...I just printed it. So, if you would, send Joe a thank you  :D

John
| FSX | FDS-MIP OVRHD SYS CARDS FC1| PM | PMDG 737-700 | UTX | GEX | UT7 | ASE | REX2 | AES | TSR | IS | TOPCAT | AvilaSoft EFB | OC CARDS & OVRHD GAUGES| SIMKITS | SW 3D Lights | FS2CREW2010 | FSXPassengers | Flight1 AE | MATROX TH2GO-D | NTHUSIM | 3-Mits EW230Ust Proj |

Offline Joe Lavery

  • I spend way too much on this forum!
  • *
  • Posts: 761
  • 737 Builder
  • First Name: Joseph
  • Home Location: Newport, UK
Re: John's List of 3D Printed Items for Flight Simulation
« Reply #10 on: September 23, 2018, 10:23:19 AM »
Hi John,

Thanks for the name check, it wasn't exactly a masterpiece was it... ;)

But I also read your opening post and realised that you use the same method of making sure your 3D prints stick to the build plate as I used to.

I saw an advert on YouTube for a product called Printbite+, and I figured it was the same as all these other surfaces you see people talking about. Well I decided to order a sheet as it's not that expensive and WOW it's remarkable.
Once you get the distance right it's goodby to glue stick and goodby to failed prints as well. Since I bought it I haven't had a print fail, sorry that's a lie, I was trying to print the barrel of a replica gun on it's end, and just before it finished it came unstuck. Don't ask why I was printing that, we're not allowed to own guns like you guys, so I thought I'd see how it turned out. There are dozens on Thingiverse as you probably know.
Anyway back to Printbite+, it's a strange product and needs the bed heated right though the print, but once it's finished and cooled down you can simply lift it off.

I have nothing to do with the company, I am just a customer but believe me it will change how you print. Now I simply start the print and walk away, I always use a 5 line brim and that makes sure the filament is extruding okay before the print actually starts.

However I thought I would tell you of my experience, it may be of interest.

This is where I bought mine, but it may be available in the US as well, but make sure it's Printbite+, there was an earlier product called just Printbite which I'm told is not quite as good.

https://flex3drive.com/product/printbite/?fueid=1421&qid=3049

And this is the video I saw before I bought it.
https://www.youtube.com/watch?v=lMNHxnsX8yw

All the best
Joe.

'Life isn't about waiting for the storm to pass, it's about learning to dance in the rain!'

www.pcpilot.net


Offline blueskydriver

  • I am chained to this website!
  • *
  • Posts: 1,891
  • FSX/FS9 PM, PMDG737-700, FDSMIP/Overhead.etc
  • First Name: John
  • Home Location: WI
Re: John's List of 3D Printed Items for Flight Simulation
« Reply #11 on: September 23, 2018, 02:55:02 PM »
Hey Joe,

You're welcome. You do deserve all the credit for sure, and it's great work, as the other guys have posted about getting it.

I looked into the Printbite+ and it looks really good. Must be very popular as they have a 5-7 day delay on just ordering it. Still, I will place an order and have them cut it to fit the 300x300x400 bed. Once I get it setup I'll let you know how it goes...

Thanks again,

John
| FSX | FDS-MIP OVRHD SYS CARDS FC1| PM | PMDG 737-700 | UTX | GEX | UT7 | ASE | REX2 | AES | TSR | IS | TOPCAT | AvilaSoft EFB | OC CARDS & OVRHD GAUGES| SIMKITS | SW 3D Lights | FS2CREW2010 | FSXPassengers | Flight1 AE | MATROX TH2GO-D | NTHUSIM | 3-Mits EW230Ust Proj |

Offline blueskydriver

  • I am chained to this website!
  • *
  • Posts: 1,891
  • FSX/FS9 PM, PMDG737-700, FDSMIP/Overhead.etc
  • First Name: John
  • Home Location: WI
Re: John's List of 3D Printed Items for Flight Simulation
« Reply #12 on: October 22, 2018, 08:14:39 PM »
Hey Everyone,

Looks like I'll be printing the fire handles for Joe and I'll be ordering filament for his project...

If you have been thinking of getting something 3D printed now or in the future, and if you want me to do it, I can look at ordering the filament color, and then get it at the same time I order for Joe; it would save him and you shipping costs.

Presently, I'm only doing small items, nothing to complex. I am not charging fees. All I get is what's left on the filament spool in exchange for my setup and machine time. Average filament spool costs $25-$50 depending on type and color.

Lastly, PM me for any questions regarding printing. If you want something designed or modeled please PM Joe L. and ask him...he is a super nice guy!

Kind Regards,

John
| FSX | FDS-MIP OVRHD SYS CARDS FC1| PM | PMDG 737-700 | UTX | GEX | UT7 | ASE | REX2 | AES | TSR | IS | TOPCAT | AvilaSoft EFB | OC CARDS & OVRHD GAUGES| SIMKITS | SW 3D Lights | FS2CREW2010 | FSXPassengers | Flight1 AE | MATROX TH2GO-D | NTHUSIM | 3-Mits EW230Ust Proj |

 

Recent Posts

Hi everyone!
by jskibo
[Today at 08:05:33 AM]
737-800 Front window post size
by kurt-olsson
[Today at 03:35:11 AM]
Shipping Woes
by Caflyt
[August 22, 2019, 10:47:49 AM]
Official WF 2019 Route
by dougsnow
[August 21, 2019, 07:49:35 PM]
Worldflight 2019 Open for Business
by Trevor Hale
[August 21, 2019, 08:28:13 AM]
More ?'s - annunciators?
by kattz
[August 21, 2019, 05:44:21 AM]
Looking for annunciators
by kattz
[August 19, 2019, 10:36:39 PM]
OK, So here we go!
by Caflyt
[August 19, 2019, 02:32:28 PM]
Flight Illusion Boeing Press Gauge for sale
by XOrionFE
[August 19, 2019, 08:40:35 AM]
Shell placement and yoke placement questions
by helloo
[August 18, 2019, 02:37:26 PM]
panel sismo oh
by gufau
[August 17, 2019, 04:17:00 AM]
My next sim?
by fsaviator
[August 16, 2019, 06:54:51 PM]
What have you done for your simulator today?
by blueskydriver
[August 14, 2019, 10:35:26 AM]
Looking for gear lever from 747-400, 757
by navymustang
[August 13, 2019, 10:05:44 AM]
Quick way to attach low res/smaller file size pics in your posts...
by Vincent T.
[August 12, 2019, 09:58:46 PM]
Cant post attachments from my iphone
by Trevor Hale
[August 12, 2019, 09:26:08 AM]
For Sale: Engravity 737 Window Frames
by Caflyt
[August 11, 2019, 05:02:28 PM]
737-800 Arduino X-Plane Build
by kurt-olsson
[August 10, 2019, 01:43:57 PM]
Help identifying a connector
by kurt-olsson
[August 10, 2019, 10:59:31 AM]
items/oem from overhead
by gufau
[August 09, 2019, 12:06:59 PM]
For Sale GoFlight Jet Console, 2 Private Pilot Racks all with GoFlight Modules.
by blueskydriver
[August 08, 2019, 09:40:02 PM]
Flightdeck Solutions Works with X-Plane11
by Michael_B737_ATP
[August 07, 2019, 02:59:21 PM]
Boeing Dual Linked Yokes for sale
by tennyson
[August 07, 2019, 07:34:58 AM]
CPFLight Backlighting
by mickc
[August 05, 2019, 10:09:53 PM]
Three Projector 210 degree with P3D4
by Nat Crea
[August 03, 2019, 08:36:50 PM]
Looking for part numbers from the 737 NG IPC
by mickc
[August 02, 2019, 11:20:49 PM]
WF2019
by Sam Llorca
[August 02, 2019, 09:22:56 PM]
Teensy LC Fuel Panel A (top)
by bernard S
[August 02, 2019, 06:09:00 PM]
737 overhead
by nigel27
[July 28, 2019, 11:50:47 PM]