Cockpit

* User Profile

Welcome, Guest. Please login or register.

Login with username, password and session length

Who's Online

  • *Users: 1
  • *Guests: 64
  • *Total: 65

Our Discord

Author Topic: Three Projector 210 degree with P3D4  (Read 1736 times)

Offline fsaviator

  • I am chained to this website!
  • *
  • Posts: 1,367
  • Aviation Enthusiast
    • Boeing 737 Next Generation Simulator
  • First Name: Warren
  • Home Location: Riverview, Florida
Three Projector 210 degree with P3D4
« on: December 29, 2018, 09:20:20 AM »
I'm looking for a guide to setup a three projector 210 degree external view in P3D.

CAVEATS:
- Please refrain from comments on warping software opinions unless it provides a specific and pertinent capability others don't.  I'd like to focus the discussion on the process not the software.

- I already know that Nat does a fantastic job but that is not an option right now

- I am limited to using one PC with an RTX 2070 to drive the projectors.
--------------------------------------------------------------------------------------------

-I'm using P3D4 (recently switched from FSX)
-I have a 210 degree screen with a 15ft/3m diameter.  It is 80 inches high
-I have three Optoma GT1080Darbee projectors
-I have a Digital Th2Go available to use if needed
-I prefer butted edge views as opposed to blended edges

Questions to start with: 
-4:3 or 16:9?  I have the screen real estate for both and would like to get the most out of it

-Can I use the windowmaker tool with P3D4?

-What is the sweet spot as far as angle of view for each projector to minimize distoration and bending in the banks and climbs?

Thanks for your help!


« Last Edit: December 29, 2018, 09:22:50 AM by fsaviator »
Warren "MTN385"
Florida

http://www.B737NG-SIM.com and https://www.facebook.com/fsaviator on facebook
FSX, Prosim737 Suite, FDS DSTD 2.0 MIP, RevSim Proline TQ, ACE Dual-linked Yokes, Intel 3.5GHz i7-3770K, MSI Z77A-G45, 16GB G.Skill TridentX DDR3-2400, Galaxy GTX670 GC 4GB, OCZ 60GB Vertex 3

Offline tennyson

  • I may as well be Staff!
  • *
  • Posts: 517
  • Aviation Enthusiast
  • First Name: Frank
  • Home Location: Brisbane, Australia
Re: Three Projector 210 degree with P3D4
« Reply #1 on: December 29, 2018, 09:45:56 AM »
Hi Warren.
These two video's which I just released a few days back may be just what you are looking for.

They are dedicated to Fly_Elise Calibration Pro and Immersive Display Pro and the integration using ViewGroups, into P3D V 4.4.

It is done via single PC with triple projectors.


Part 1: https://www.youtube.com/watch?v=Y7s0B0kWSIY&t=1095s

Part 2: https://www.youtube.com/watch?v=jBVWaYmtK3E&t=169s


Hope this helps,

Kind Regards,


Frank Cooper

Offline fsaviator

  • I am chained to this website!
  • *
  • Posts: 1,367
  • Aviation Enthusiast
    • Boeing 737 Next Generation Simulator
  • First Name: Warren
  • Home Location: Riverview, Florida
Re: Three Projector 210 degree with P3D4
« Reply #2 on: December 29, 2018, 12:39:43 PM »
I was waiting on the second video!

It's a start.

Thanks Frank!
Warren "MTN385"
Florida

http://www.B737NG-SIM.com and https://www.facebook.com/fsaviator on facebook
FSX, Prosim737 Suite, FDS DSTD 2.0 MIP, RevSim Proline TQ, ACE Dual-linked Yokes, Intel 3.5GHz i7-3770K, MSI Z77A-G45, 16GB G.Skill TridentX DDR3-2400, Galaxy GTX670 GC 4GB, OCZ 60GB Vertex 3

Offline fsaviator

  • I am chained to this website!
  • *
  • Posts: 1,367
  • Aviation Enthusiast
    • Boeing 737 Next Generation Simulator
  • First Name: Warren
  • Home Location: Riverview, Florida
Re: Three Projector 210 degree with P3D4
« Reply #3 on: December 29, 2018, 02:06:50 PM »
Hi Warren.
These two video's which I just released a few days back may be just what you are looking for.

They are dedicated to Fly_Elise Calibration Pro and Immersive Display Pro and the integration using ViewGroups, into P3D V 4.4.

It is done via single PC with triple projectors.


Part 1: https://www.youtube.com/watch?v=Y7s0B0kWSIY&t=1095s

Part 2: https://www.youtube.com/watch?v=jBVWaYmtK3E&t=169s


Hope this helps,

Kind Regards,


Frank Cooper

Frank,
I'll definitely reference your videos once I get to that point.

What I am not getting (or maybe I missed) in the video is how did you determine the mounting location/direction/distance for your projectors?

Does the Fly-Elise software tell you that?
Warren "MTN385"
Florida

http://www.B737NG-SIM.com and https://www.facebook.com/fsaviator on facebook
FSX, Prosim737 Suite, FDS DSTD 2.0 MIP, RevSim Proline TQ, ACE Dual-linked Yokes, Intel 3.5GHz i7-3770K, MSI Z77A-G45, 16GB G.Skill TridentX DDR3-2400, Galaxy GTX670 GC 4GB, OCZ 60GB Vertex 3

Offline navymustang

  • Simulation Engineer
  • I may as well be Staff!
  • *
  • Posts: 523
  • Building a 737-800 full scale cockpit
  • First Name: Jim
  • Home Location: KMCO
Re: Three Projector 210 degree with P3D4
« Reply #4 on: December 29, 2018, 03:37:26 PM »
WindowMaker works perfect for entering the correct data into P3D v4
Building a full scale 737-800 AATD for home use. Majority of hardware is from Sismo Solutions, software is Prosim under P3D. An AOPA member and LifeTime member of National Association of Flight Instructors
Please note that I am a self-employed professional cockpit builder that provides consulting to defense contractors and civilian schools and airlines.

Offline fsaviator

  • I am chained to this website!
  • *
  • Posts: 1,367
  • Aviation Enthusiast
    • Boeing 737 Next Generation Simulator
  • First Name: Warren
  • Home Location: Riverview, Florida
Re: Three Projector 210 degree with P3D4
« Reply #5 on: December 29, 2018, 04:11:52 PM »
WindowMaker works perfect for entering the correct data into P3D v4

Thanks!  I figured as much but wanted to check.

Warren "MTN385"
Florida

http://www.B737NG-SIM.com and https://www.facebook.com/fsaviator on facebook
FSX, Prosim737 Suite, FDS DSTD 2.0 MIP, RevSim Proline TQ, ACE Dual-linked Yokes, Intel 3.5GHz i7-3770K, MSI Z77A-G45, 16GB G.Skill TridentX DDR3-2400, Galaxy GTX670 GC 4GB, OCZ 60GB Vertex 3

Offline tennyson

  • I may as well be Staff!
  • *
  • Posts: 517
  • Aviation Enthusiast
  • First Name: Frank
  • Home Location: Brisbane, Australia
Re: Three Projector 210 degree with P3D4
« Reply #6 on: December 29, 2018, 08:35:57 PM »
Warren,
I did a plan of the room on the computer and mapped exactly where my projectors had to go according to the screen width.
My screen is 4.8 metres wide and my projectors, which are also positioned directly above the back of the cockpit, are just slightly ahead of the radius point of the screen. That is why I have set mine up as a 180 degree screen.


If I'd had a slightly bigger screen, or been able to move the platform that my cockpit is sitting on, I would have been able to increase the angle of view, maybe 200 or 210.

My mate, Richard, in New Zealand, has the same set-up. He is able to move his cockpit a little more forward, so, on his next calibration that we do, later in 2019, we will increase his viewing angle to 200 degrees.

The other governing factor in this is your overlap. Fly-Elise suggest 10% and I have stuck to that, which is very important if you are expecting a good merge and blend.

Regards,


Frank

Offline fsaviator

  • I am chained to this website!
  • *
  • Posts: 1,367
  • Aviation Enthusiast
    • Boeing 737 Next Generation Simulator
  • First Name: Warren
  • Home Location: Riverview, Florida
Re: Three Projector 210 degree with P3D4
« Reply #7 on: December 29, 2018, 11:43:57 PM »
Well, I've managed to apply the the windowmaker edits to the P3D4 fxml file as well as the 3-window vs 4 window changes.

Everything looks good on the LCD screen tonight.  I hope to have time tomorrow to output this to the projectors and onto the screen.

I redid the screen frame and it's set up in the garage right now.  I'll get it all working in there before transferring it all into the sim room.  That will let me get the projectors aligned on the floor as opposed to fighting gravity and the sim shell to get it done.
Warren "MTN385"
Florida

http://www.B737NG-SIM.com and https://www.facebook.com/fsaviator on facebook
FSX, Prosim737 Suite, FDS DSTD 2.0 MIP, RevSim Proline TQ, ACE Dual-linked Yokes, Intel 3.5GHz i7-3770K, MSI Z77A-G45, 16GB G.Skill TridentX DDR3-2400, Galaxy GTX670 GC 4GB, OCZ 60GB Vertex 3

Offline jmlohrenz

  • Forum GURU
  • *
  • Posts: 101
  • Aviation Enthusiast
  • First Name: Jason
  • Home Location: MN, USA
Re: Three Projector 210 degree with P3D4
« Reply #8 on: December 31, 2018, 11:16:15 AM »
Is your 210 degree view more of a horse shoe layout than a constantly curving screen?  I'm in the same boat, same projectors, and single PC but looking at either getting a second 1080ti or trying with my single one to get it to work.

Offline fsaviator

  • I am chained to this website!
  • *
  • Posts: 1,367
  • Aviation Enthusiast
    • Boeing 737 Next Generation Simulator
  • First Name: Warren
  • Home Location: Riverview, Florida
Re: Three Projector 210 degree with P3D4
« Reply #9 on: December 31, 2018, 11:30:23 AM »
Is your 210 degree view more of a horse shoe layout than a constantly curving screen?  I'm in the same boat, same projectors, and single PC but looking at either getting a second 1080ti or trying with my single one to get it to work.

It's a continuous 210 radius.  Finished the gantry this morning.  I won't mount the projectors yet as I'll adjust them on the floor, but I need the gantry to tie in to the screen sides and keep them vertical.  It works like a charm.

Both the screen legs and the gantry legs are also height adjustable.  The gantry is at the lowest setting to clear the garage opener right now.

The trick is taking it apart and getting into my sim room.  Note to self:  when confined to a small room, upgrade visuals before building the sim and shell.
« Last Edit: December 31, 2018, 11:32:09 AM by fsaviator »
Warren "MTN385"
Florida

http://www.B737NG-SIM.com and https://www.facebook.com/fsaviator on facebook
FSX, Prosim737 Suite, FDS DSTD 2.0 MIP, RevSim Proline TQ, ACE Dual-linked Yokes, Intel 3.5GHz i7-3770K, MSI Z77A-G45, 16GB G.Skill TridentX DDR3-2400, Galaxy GTX670 GC 4GB, OCZ 60GB Vertex 3

Offline fsaviator

  • I am chained to this website!
  • *
  • Posts: 1,367
  • Aviation Enthusiast
    • Boeing 737 Next Generation Simulator
  • First Name: Warren
  • Home Location: Riverview, Florida
Re: Three Projector 210 degree with P3D4
« Reply #10 on: December 31, 2018, 10:28:09 PM »
Well...  success I think.  Here's a video of progress so far.  Not sure why the video is such poor quality.

Initial try with 210 = 3 x 70 degrees was very distorted in the banks and climbs.  I changed it to 60 deg in the views and it is much better.  The zoom factor in Windowmaker also didn't work out.  I played with it a bit and settled on about 0.92 Zoom for the side views and 0.93 for the center.

I'm using Nthusim for the warping.  It acted a little strange the first few times I started P3D but settled itself out finally.

https://youtu.be/Bz3oG6xSxC0
Warren "MTN385"
Florida

http://www.B737NG-SIM.com and https://www.facebook.com/fsaviator on facebook
FSX, Prosim737 Suite, FDS DSTD 2.0 MIP, RevSim Proline TQ, ACE Dual-linked Yokes, Intel 3.5GHz i7-3770K, MSI Z77A-G45, 16GB G.Skill TridentX DDR3-2400, Galaxy GTX670 GC 4GB, OCZ 60GB Vertex 3

Offline Trevor Hale

  • Administrator
  • I am chained to this website!
  • *
  • Posts: 3,840
    • Cockpitbuilders.com
  • First Name: Trevor
  • Home Location: New Liskeard, Ontario
Re: Three Projector 210 degree with P3D4
« Reply #11 on: December 31, 2018, 11:06:44 PM »
Wow Warren, The Screen video is awesome...  The Right Screen and Center Matches Perfect, Your Left Screen (Right Projector) Sitting in the cockpit seems like the warp didn't quite take.  But the blend on the the center to the right is outstanding and I can;t see the typical lines we can normally see in videos even though in reality they aren't there.  Your blend is damn near perfect.
Great Job.

Trevor Hale

Owner
http://www.cockpitbuilders.com

Director of Operations
Worldflight Team USA
http://www.worldflightusa.com

VATSIM:

Offline Garys

  • Forum GURU
  • *
  • Posts: 407
  • First Name: Gary
  • Home Location: Canada
Re: Three Projector 210 degree with P3D4
« Reply #12 on: January 01, 2019, 01:05:08 AM »
Hey Warren, Nthusim is no longer so would definitely dump it. Anything from windows or P3Dv4 updates could brick it with no option to move fwd.

Happy New Year!
« Last Edit: January 04, 2019, 06:34:57 AM by Garys »

Offline fsaviator

  • I am chained to this website!
  • *
  • Posts: 1,367
  • Aviation Enthusiast
    • Boeing 737 Next Generation Simulator
  • First Name: Warren
  • Home Location: Riverview, Florida
Re: Three Projector 210 degree with P3D4
« Reply #13 on: January 01, 2019, 10:45:21 AM »
Hey Warren, Nthusim is no longer so would definitely dump it. Anything from windows or P3Dv4 updates could brick it with no option to move fwd. Nat recommends Flyelise and that is what I and several builders are using to good effect.


Happy New Year!

Yep, I know...  Nthusim is working so far, though
I have downloaded Fly-Elise and using the demo but truthfully I hate to spend the time to figure out...  it definitely has a learning curve compared to Nthusim.

Thanks!  Have a great year!
Warren "MTN385"
Florida

http://www.B737NG-SIM.com and https://www.facebook.com/fsaviator on facebook
FSX, Prosim737 Suite, FDS DSTD 2.0 MIP, RevSim Proline TQ, ACE Dual-linked Yokes, Intel 3.5GHz i7-3770K, MSI Z77A-G45, 16GB G.Skill TridentX DDR3-2400, Galaxy GTX670 GC 4GB, OCZ 60GB Vertex 3

Offline FredK

  • I may as well be Staff!
  • *
  • Posts: 533
  • 737NG Cockpit Builder
  • First Name: Fred Kurasiewicz
  • Home Location: Williamsburg, Virginia, USA
Re: Three Projector 210 degree with P3D4
« Reply #14 on: January 01, 2019, 01:37:05 PM »
Hi Warren

I have used Nthusim in the past and Fly Elise currently.

Do not be daunted about what Fly Elise appears to be.......

There are two approaches with Fly Elise....The "Camera" method (which can be daunting coming from Nthusim) and the "On-Screen" method (basically the same process as Nthusim with some extra features to simplify use with ViewGroups).

There are separate manuals for each....That said, both are not written very well.

I am using the "On Screen" method with very good results.  There really are only 10 or so specific steps in the process.  I came up to speed in about an hour following the manual closely page-by-page.

So if you have an hour of time and the extra bucks it is well worth it!

Fred K
Boeing 737NG-800, Prepar3D v4.3, Sim-Avionics, WideView multi-channel (curved screen), Optoma 1080GTDarbee projectors (3), Fly Elise warping, FSGRW weather, FDS OH panels and CDUs, SimParts MIP, FDS SysBoards (OH), CPFlight MCPPro and pedestal panels, FI Gauges, PFC controls, converted motorized TQ (SIOC), Weber seats

Offline MCrevot

  • Forum GURU
  • *
  • Posts: 52
  • A320-like cockpit builder
    • my A320 sim
  • First Name: Michel Crevot
  • Home Location: Pornic - France
Re: Three Projector 210 degree with P3D4
« Reply #15 on: January 08, 2019, 10:37:49 AM »
Hello Warren,

the right solution to project 3 views is to use wideview, not very difficult and so nice, look at my web site (http://www.mya320sim.com/3-vdp-et-un-ecran-cylindrique/, 2 PCs are enough ; Fly elise pro works well.

Michel
my website : http://www.myA320sim.com
7700k, 4790k, 2600k, P3Dv4 and A320 FMGS, 3 views on 3 vdp with wideview, 180 deg screen

Offline Nat Crea

  • I may as well be Staff!
  • *
  • Posts: 552
  • 737 Builder
  • First Name: Nat
  • Home Location: Australia
Re: Three Projector 210 degree with P3D4
« Reply #16 on: January 08, 2019, 07:18:14 PM »
Quote
Hello Warren,

the right solution to project 3 views is to use wideview

Its a (old) solution, but not the only solution honestly, we've been running Single IG 220FOV
visuals for a few years for Pro and Private customers.
Same 200-220FOV view on one PC without the network headaches.

Nat

Offline fsaviator

  • I am chained to this website!
  • *
  • Posts: 1,367
  • Aviation Enthusiast
    • Boeing 737 Next Generation Simulator
  • First Name: Warren
  • Home Location: Riverview, Florida
Re: Three Projector 210 degree with P3D4
« Reply #17 on: January 08, 2019, 08:18:05 PM »
Quote
Hello Warren,

the right solution to project 3 views is to use wideview

Its a (old) solution, but not the only solution honestly, we've been running Single IG 220FOV
visuals for a few years for Pro and Private customers.
Same 200-220FOV view on one PC without the network headaches.

Nat

That's what I'm shooting for.  I've got the 220 with one IG.  So far so good in the garage, but once I got it into the sim room with the shell, i have some shadowing on the sides.  It's workable but I'm not happy yet.  Can't get the gantry high enough.  I'm going to play with positioning the side views a bit more.
Warren "MTN385"
Florida

http://www.B737NG-SIM.com and https://www.facebook.com/fsaviator on facebook
FSX, Prosim737 Suite, FDS DSTD 2.0 MIP, RevSim Proline TQ, ACE Dual-linked Yokes, Intel 3.5GHz i7-3770K, MSI Z77A-G45, 16GB G.Skill TridentX DDR3-2400, Galaxy GTX670 GC 4GB, OCZ 60GB Vertex 3

Offline Garys

  • Forum GURU
  • *
  • Posts: 407
  • First Name: Gary
  • Home Location: Canada
Re: Three Projector 210 degree with P3D4
« Reply #18 on: January 09, 2019, 02:34:32 AM »
I still highly recommend changing out your warping software Warren. Its only a matter of time until your stuck in the past while the rest of us move along with the updates that P3D and Xplane are pushing out.

Offline blueskydriver

  • I am chained to this website!
  • *
  • Posts: 1,868
  • FSX/FS9 PM, PMDG737-700, FDSMIP/Overhead.etc
  • First Name: John
  • Home Location: WI
Re: Three Projector 210 degree with P3D4
« Reply #19 on: January 09, 2019, 05:45:05 AM »
Hi Warren,

Can you just remove the garage door opener to get the gantry higher? You'll still have a functioning garage door, just no automation. Which is actually easier then you think to open by hand; garage doors are setup to only need a minimum amount of force to rasie them and it's really all about the spring tension anyway.

Thus, I suggest you try it out by pulling the chain release rope on the pully/chain bar. It should be easy to open. If not, lubricate the tension springs, the guide rails and wheels on both sides, as well as all the hinges in each door panel section.

Looking at your picture, you'll likely gain at least 18-24", if not more by removing the opener. Plus, Karen and I did this years ago when my sim was in our garage, back before we had the hanger/shed built, and it made all the difference in the world. Well, lol...in my sim world that is  :idiot:

John

Note: Do not use WD40, it only helps collect dust and dirt where you don't need it; instead, use a garage door specific lubricate. 
| FSX | FDS-MIP OVRHD SYS CARDS FC1| PM | PMDG 737-700 | UTX | GEX | UT7 | ASE | REX2 | AES | TSR | IS | TOPCAT | AvilaSoft EFB | OC CARDS & OVRHD GAUGES| SIMKITS | SW 3D Lights | FS2CREW2010 | FSXPassengers | Flight1 AE | MATROX TH2GO-D | NTHUSIM | 3-Mits EW230Ust Proj |

Offline fsaviator

  • I am chained to this website!
  • *
  • Posts: 1,367
  • Aviation Enthusiast
    • Boeing 737 Next Generation Simulator
  • First Name: Warren
  • Home Location: Riverview, Florida
Re: Three Projector 210 degree with P3D4
« Reply #20 on: January 09, 2019, 06:16:11 AM »
Hi Warren,

Can you just remove the garage door opener to get the gantry higher? You'll still have a functioning garage door, just no automation. Which is actually easier then you think to open by hand; garage doors are setup to only need a minimum amount of force to rasie them and it's really all about the spring tension anyway.
John, it's out of the garage and in the sim room.  No problem there.  I built both the screen and gantry so they come apart easily for transport.  They are also both adjustable in height.

The issue is that while the center of my sim room is 9 feet high, the outer edges are only 8 feet high, and that is what determines the height of my gantry (and what I failed to account for in design).

I'm going to play with flipping the side projectors right side up and putting them on the top of the gantry projecting down.
Warren "MTN385"
Florida

http://www.B737NG-SIM.com and https://www.facebook.com/fsaviator on facebook
FSX, Prosim737 Suite, FDS DSTD 2.0 MIP, RevSim Proline TQ, ACE Dual-linked Yokes, Intel 3.5GHz i7-3770K, MSI Z77A-G45, 16GB G.Skill TridentX DDR3-2400, Galaxy GTX670 GC 4GB, OCZ 60GB Vertex 3

Offline Nat Crea

  • I may as well be Staff!
  • *
  • Posts: 552
  • 737 Builder
  • First Name: Nat
  • Home Location: Australia
Re: Three Projector 210 degree with P3D4
« Reply #21 on: January 09, 2019, 06:53:45 AM »
Quote
I'm going to play with flipping the side projectors right side up and putting them on the top of the gantry projecting down.

Sorry mate, expect some psychedelic consequences if you try that  :o

Nat
« Last Edit: January 09, 2019, 07:00:25 AM by Nat Crea »

Offline fsaviator

  • I am chained to this website!
  • *
  • Posts: 1,367
  • Aviation Enthusiast
    • Boeing 737 Next Generation Simulator
  • First Name: Warren
  • Home Location: Riverview, Florida
Re: Three Projector 210 degree with P3D4
« Reply #22 on: January 09, 2019, 07:12:53 PM »
Quote
I'm going to play with flipping the side projectors right side up and putting them on the top of the gantry projecting down.

Sorry mate, expect some psychedelic consequences if you try that  :o

Nat
;D ;D
Warren "MTN385"
Florida

http://www.B737NG-SIM.com and https://www.facebook.com/fsaviator on facebook
FSX, Prosim737 Suite, FDS DSTD 2.0 MIP, RevSim Proline TQ, ACE Dual-linked Yokes, Intel 3.5GHz i7-3770K, MSI Z77A-G45, 16GB G.Skill TridentX DDR3-2400, Galaxy GTX670 GC 4GB, OCZ 60GB Vertex 3

Offline blueskydriver

  • I am chained to this website!
  • *
  • Posts: 1,868
  • FSX/FS9 PM, PMDG737-700, FDSMIP/Overhead.etc
  • First Name: John
  • Home Location: WI
Re: Three Projector 210 degree with P3D4
« Reply #23 on: January 10, 2019, 04:12:26 AM »
Hey Warren,

Sorry, I missed the part about you being in the sim room now... :D.

This will sound crazy, but can you build a boxed up higher ceiling just for the projectors? Kind of like having projectors retracting up into the ceiling, but you just use the space for mounting yours higher.

Take a look at this link:

https://medium.com/the-freerange-techologist/installing-short-throw-projectors-in-rooms-with-low-ceilings-bf2d0d12c477

Basically, the writer of the article was dealing with a similar situation, but not with a simulator; he was in a classroom environment.

If you have any space above the ceiling, even a few inches, it'd be worth trying. Usually, floor or ceiling joists are 2x6's" or bigger...

John

Note: I attached the photos from that page.
| FSX | FDS-MIP OVRHD SYS CARDS FC1| PM | PMDG 737-700 | UTX | GEX | UT7 | ASE | REX2 | AES | TSR | IS | TOPCAT | AvilaSoft EFB | OC CARDS & OVRHD GAUGES| SIMKITS | SW 3D Lights | FS2CREW2010 | FSXPassengers | Flight1 AE | MATROX TH2GO-D | NTHUSIM | 3-Mits EW230Ust Proj |

 

COUNTDOWN TO WF2019


WORLDFLIGHT TEAM USA

Will Depart in...

Recent Posts

Korry 318 gets hot.
by KyleH
[July 15, 2019, 07:49:07 PM]
What have you done for your simulator today?
by blueskydriver
[July 14, 2019, 10:25:43 AM]
Flyengravity desktop MIP
by Steenos
[July 13, 2019, 07:39:33 PM]
Where to find or how to make this switch guard?
by blueskydriver
[July 13, 2019, 03:46:30 AM]
NIB 747-400 ThrottleTek + FDS CDUs x2 [SOLD]
by blueskydriver
[July 12, 2019, 10:53:12 PM]
Flight deck solutions FDS-B737NG-PRO-MX- rudder pedal
by ifeliciano
[July 11, 2019, 11:55:34 PM]
FDS 5V IBL Dimmer and Expansion Board / Pokeys 57E (SOLD)
by fsaviator
[July 10, 2019, 08:35:14 PM]
PM MCP.ini Question...
by ScottThePilot
[July 10, 2019, 12:56:38 PM]
Stab Trim Indicator...
by ScottThePilot
[July 09, 2019, 12:56:42 PM]
Boeing 737 Dual Linked Yokes
by tennyson
[July 09, 2019, 09:08:31 AM]
Teensy LC Throttle Quadrant
by kurt-olsson
[July 08, 2019, 08:09:41 AM]
Multiple Teensys, sketch upload question
by kurt-olsson
[July 08, 2019, 08:05:27 AM]
Anders Simparts - Summer info
by archen
[July 07, 2019, 03:30:31 AM]
737-800 Arduino X-Plane Build
by kurt-olsson
[July 04, 2019, 05:26:30 PM]
Group buy - Oshino OL-2405BP lamps - interested?
by kattz
[July 03, 2019, 09:26:22 PM]
Prosim737 Ver 2 license for sale
by ifeliciano
[July 02, 2019, 09:58:37 AM]
Anyone have this connector and possibly a clamp as well for the yoke?
by mickc
[July 01, 2019, 08:01:04 PM]
Happy Canada Day
by jackpilot
[July 01, 2019, 10:09:40 AM]
MH 370 Article
by FredK
[June 30, 2019, 07:28:41 PM]
Calling any B747 mechs... please help
by kattz
[June 30, 2019, 06:08:50 PM]
International shipping?
by jackpilot
[June 27, 2019, 08:29:07 AM]
Flooring Installed!
by jackpilot
[June 25, 2019, 05:49:57 PM]
How much room between center pedestal and seat?
by jackpilot
[June 25, 2019, 08:19:42 AM]
2020 Microsoft Flight Simulator - new at E3 2019
by blueskydriver
[June 24, 2019, 02:29:16 PM]
How to install DZUS fasteners?
by Buster99
[June 22, 2019, 04:12:34 PM]
Desert Air Spares - Trustworthy?
by kattz
[June 22, 2019, 12:40:51 PM]
Wanted - 737 Audio Panels - OEM
by jackpilot
[June 20, 2019, 12:26:51 PM]
Throttletek 737 Throttle For Sale
by kevinsayre
[June 19, 2019, 03:57:33 PM]
For sale - rudder pedals and linkages - SOLD - thanks, Craig!
by Caflyt
[June 19, 2019, 07:49:14 AM]
737 Throttle Conversion OC + ProSim
by kattz
[June 16, 2019, 11:39:03 AM]