Cockpit

* User Profile

Welcome, Guest. Please login or register.

Login with username, password and session length

Who's Online

  • *Users: 0
  • *Guests: 57
  • *Total: 57

Our Discord

Author Topic: CP MIP 737 card and switches wiring  (Read 5903 times)

Offline kozak737

  • CockpitBuilder
  • *
  • Posts: 8
  • Junior builder
  • First Name: Constantinos Kozakos
CP MIP 737 card and switches wiring
« on: July 24, 2010, 02:34:13 AM »
Hi,

I build up a 737 simulator and I am using the cp737 card. I wired all the switches but i am not sure if the commands are correct. Has anybody the commands list of the switches, I contancted the CP flight but they are on holidays

Thank you
Constantinos

Offline jackpilot

  • Moderator
  • I am chained to this website!
  • *
  • Posts: 4,131
  • 737-800 Sim-Avionics/Full Cockpit FDS + OEM P3D V4
  • First Name: Jack
  • Home Location: Montreal / Canada
Re: CP MIP 737 card and switches wiring
« Reply #1 on: July 24, 2010, 08:34:55 AM »
Which switches? MIP, Overhead' pedestal

Here is an overhead interactive
http://artietheairplane.com/737_panels/737_main.htm
 click on anything you want to know about ..ie: type and function of a switch
also

http://www.b737.org.uk/

There used to be more of that type...Guys???


Jack

Offline ian@737ng.co.uk

  • Forum GURU
  • *
  • Posts: 256
  • Searching For The End Of The Rainbow
    • The Trials of Building a 737NG
  • First Name: ian p.sissons
Re: CP MIP 737 card and switches wiring
« Reply #2 on: July 24, 2010, 11:58:56 AM »
hello constantinos...........
sorry, but i'm not 100% sure what you mean.
all the connections for in and out are contained in the MIP737 manual. you can find it here
http://www.cpflight.com/sito/downloads/mip737mi105.pdf
this may help you out.   or if you get real stuck, come back and ask, but be more specific please
and that may help me to understand your problem better.
enjoy tomorrow captain.....
regards from wales...  ian
FS9 - PMDG/Prosim737 - Pokeys - Lots of BU0836X and a BEER FRIDGE :D

Offline kozak737

  • CockpitBuilder
  • *
  • Posts: 8
  • Junior builder
  • First Name: Constantinos Kozakos
Re: CP MIP 737 card and switches wiring
« Reply #3 on: July 24, 2010, 01:14:28 PM »
Hi,

I refer to the switches and rotaries of the MIP, when I turn the rotaries, they show one command, that command cannot specify if it is correct or not. I have sent to the CP flight but they are on holidays so they could not help at the moment. The rotaries are working, just i do not have their confirmation if  they are connected correctly and if their function work properly.

Thank you Captains
Constantinols

Offline jackpilot

  • Moderator
  • I am chained to this website!
  • *
  • Posts: 4,131
  • 737-800 Sim-Avionics/Full Cockpit FDS + OEM P3D V4
  • First Name: Jack
  • Home Location: Montreal / Canada
Re: CP MIP 737 card and switches wiring
« Reply #4 on: July 24, 2010, 02:10:03 PM »
Still unclear.

I checked the Pdf mentionned by Ian and it is all there..
Do you use Project Magenta ?
JP


Jack

Offline kozak737

  • CockpitBuilder
  • *
  • Posts: 8
  • Junior builder
  • First Name: Constantinos Kozakos
Re: CP MIP 737 card and switches wiring
« Reply #5 on: July 25, 2010, 12:26:25 AM »
Hi captain Jack,

I am using flight deck software. It is not unclear.  There is one sheet where all commands is there.  I suspect that some they are not working properly. The flightdeck software doesn't support 100% the MIP 737 so the wires are loose.

With regards
Constantinos

Offline dnoize

  • Forum GURU
  • *
  • Posts: 151
  • Junior Builder
  • First Name: stef pagonakis
Re: CP MIP 737 card and switches wiring
« Reply #6 on: July 25, 2010, 05:30:05 PM »
flightdecksoftware supports most (if not all) of the inputs of the mip737 board.

If you wired them correctly they should work ?

What rotaries do not work ?

Do you see them work in the cpflight testprogram ?

what rotaries do not work ? I will ask Bart to check. I have a direct communication line with him.

Stef

Offline kozak737

  • CockpitBuilder
  • *
  • Posts: 8
  • Junior builder
  • First Name: Constantinos Kozakos
Re: CP MIP 737 card and switches wiring
« Reply #7 on: July 26, 2010, 11:53:16 PM »
Hi Stef,

I use the cp test program. They are working using the cp program test, but most of them repeat the same input number.  I don't have a list of input to confirm them. I ask from the flightdeck to send me the rotaries that they are working but until now I don't have it.


Constantinos

Offline dnoize

  • Forum GURU
  • *
  • Posts: 151
  • Junior Builder
  • First Name: stef pagonakis
Re: CP MIP 737 card and switches wiring
« Reply #8 on: July 27, 2010, 01:40:55 AM »
each input should give an individual number in the testprogram. If you get the same number for several inputs its means you have mixed up the grounds on the mipboard sight or have soldered the wires wrongly on the switches.

I would suggest to disconnect everything and wire just a few simple switches to test (some pushbuttons or toggles) within one group. When these work, progress slowly wiring group by group and test after each group if you get individual numbers in the test program.

If you get all the same numbers in the testprogram it will not work in Flightdecksoftware ofcourse as it does not get the correct information.

The DU rotary switches, afds, landing gear, etc should all work correctly in flightdecksoftware !

Stef

Offline kozak737

  • CockpitBuilder
  • *
  • Posts: 8
  • Junior builder
  • First Name: Constantinos Kozakos
Re: CP MIP 737 card and switches wiring
« Reply #9 on: July 27, 2010, 02:22:52 PM »
Hi Stef

Thank you

 

COUNTDOWN TO WF2019


WORLDFLIGHT TEAM USA

Will Depart in...

Recent Posts

Official WF 2019 Route
by dougsnow
[Today at 07:49:35 PM]
737-800 Front window post size
by kurt-olsson
[Today at 01:19:13 PM]
Worldflight 2019 Open for Business
by Trevor Hale
[Today at 08:28:13 AM]
More ?'s - annunciators?
by kattz
[Today at 05:44:21 AM]
Hi everyone!
by fsaviator
[August 20, 2019, 01:29:02 PM]
Looking for annunciators
by kattz
[August 19, 2019, 10:36:39 PM]
OK, So here we go!
by Caflyt
[August 19, 2019, 02:32:28 PM]
Flight Illusion Boeing Press Gauge for sale
by XOrionFE
[August 19, 2019, 08:40:35 AM]
Shell placement and yoke placement questions
by helloo
[August 18, 2019, 02:37:26 PM]
panel sismo oh
by gufau
[August 17, 2019, 04:17:00 AM]
My next sim?
by fsaviator
[August 16, 2019, 06:54:51 PM]
What have you done for your simulator today?
by blueskydriver
[August 14, 2019, 10:35:26 AM]
Shipping Woes
by Ed
[August 13, 2019, 11:55:37 AM]
Looking for gear lever from 747-400, 757
by navymustang
[August 13, 2019, 10:05:44 AM]
Quick way to attach low res/smaller file size pics in your posts...
by Vincent T.
[August 12, 2019, 09:58:46 PM]
Cant post attachments from my iphone
by Trevor Hale
[August 12, 2019, 09:26:08 AM]
For Sale: Engravity 737 Window Frames
by Caflyt
[August 11, 2019, 05:02:28 PM]
737-800 Arduino X-Plane Build
by kurt-olsson
[August 10, 2019, 01:43:57 PM]
Help identifying a connector
by kurt-olsson
[August 10, 2019, 10:59:31 AM]
items/oem from overhead
by gufau
[August 09, 2019, 12:06:59 PM]
For Sale GoFlight Jet Console, 2 Private Pilot Racks all with GoFlight Modules.
by blueskydriver
[August 08, 2019, 09:40:02 PM]
Flightdeck Solutions Works with X-Plane11
by Michael_B737_ATP
[August 07, 2019, 02:59:21 PM]
Boeing Dual Linked Yokes for sale
by tennyson
[August 07, 2019, 07:34:58 AM]
CPFLight Backlighting
by mickc
[August 05, 2019, 10:09:53 PM]
Three Projector 210 degree with P3D4
by Nat Crea
[August 03, 2019, 08:36:50 PM]
Looking for part numbers from the 737 NG IPC
by mickc
[August 02, 2019, 11:20:49 PM]
WF2019
by Sam Llorca
[August 02, 2019, 09:22:56 PM]
Teensy LC Fuel Panel A (top)
by bernard S
[August 02, 2019, 06:09:00 PM]
737 overhead
by nigel27
[July 28, 2019, 11:50:47 PM]