Text only | Text with Images

Cockpitbuilders.com

CAD/CNC/3D Printing => 3D Printing => Topic started by: IFLY3 on February 16, 2019, 04:49:37 AM

Title: Throttle
Post by: IFLY3 on February 16, 2019, 04:49:37 AM
This is my 3 dprinted throttle from thingiverse(usajet) everything but the brake lever is printed,the trim wheels alone took 24 hrs.
Title: Re: Throttle
Post by: 727737Nut on February 17, 2019, 05:14:54 AM
Nice job....be careful with the AT without any clutch installed.
Text only | Text with Images