Hi all
I have 4 screens in my new built mip.
What's best way of setting these up? Vga cable? Splitter? Free software for my 737 to link .
Hope you can help
It really depends on your GPU. I have a PC for Prosim that had 2 gpus each with 4 inputs. I use converters where i need to.
I think to help you, we are going to need a little more information, like, what avionics software, what GPU in the computer ext....
Hi bob
Thanks for replying
Motherboard
Gigabyte H110M-S2H
CPU Type
Intel I7 7th Generation Kaby Lake
CPU Model
Intel I7 7700 Kaby Lake Quad Core 3.6Ghz (turbo 4.2Ghz) CPU
CPU Clock Speed
3.6 Ghz
CPU Max Turbo Speed
4.2 Ghz
Quote from: Tinobfc on October 30, 2017, 11:40:22 PM
Hi bob
Thanks for replying
Motherboard
Gigabyte H110M-S2H
CPU Type
Intel I7 7th Generation Kaby Lake
CPU Model
Intel I7 7700 Kaby Lake Quad Core 3.6Ghz (turbo 4.2Ghz) CPU
CPU Clock Speed
3.6 Ghz
CPU Max Turbo Speed
4.2 Ghz
And what software will you be running? A splitter will not work unless you do not wish to control the FO's side independently from the captains.
Thanks bob
Xplane 11
Software recommendations?
I want the captains screens to show on the FO screens
Quote from: Tinobfc on November 01, 2017, 12:18:14 AM
Thanks bob
Xplane 11
Software recommendations?
I want the captains screens to show on the FO screens
At the moment, I can not make any recommendations for 73NG for Xplane as to the best of my knowledge there is none for cockpit building. Maybe someone else can step in here? But the discussion has been had here many times. I was switching over to Xplane at one point but ran into the no avionics issue myself. As for if you are only wanting to see the same screen on the FO side, I would use a video splitter.
Hi
I am not sure if I totally understand your situation, but if you are looking to interface opencockpits modules with X Plane 11 then you should take a look at the software OC4BA_XP_v1.2 which will do this job for you.
You can find it at: www.flightsim4fun.com (http://www.flightsim4fun.com)
If this is not what you are looking for, sorry - I was just trying to help.
Regards
Alan
Sim-Avionics works withXP10. However at this point my understanding is that there are some issues withXP11.
FredK