Hi from Sydney

[DannyM]

Hi all

My name is Danny and I'm from Sydney Australia

My cockpit of a Cessna 172 at the moment is still in its early days ( so i have a lot of questions)
I am good at the construction side of things but the electronics side gets a bit confusing, I have been experimenting with arduino with some success.
I have built some of the frame of the cockpit and one gauge so far (I'll post pics)
As you can see in the pics i have the fortune of having access to a laser cutter so if you need something cut just ask

Thanks Danny

[Karl737]

Hi Danny,

Very nice!

Good to see another Aussie here. Welcome aboard mate. 

Cheers,
Karl

[gigio1]

Hi Danny,

Good job! Post another photos of work in progres!!


Luigi

[bernard S]

Such humble beginnings... very well done 

[jackpilot]

Danny

Do not worry too much, programming is still Chinese for many of us.
Cards and softs have become much more user friendly and you will succed.

Here is a link on a french forum (illustrations are self explaining) with a WEALTH of info for a C172
Enjoy
http://www.pilote-virtuel.com/viewtopic.php?id=69890
Jack

[DannyM]

Thanks all

That French guy did a great job on that sim, also has some measurements I was after 

Thanks again

[Aerosim Solutions]

G'day Danny from Perth!!

I have a real C172 fuselage that I will be converting next year, see the pics at my website - http://www.aerosimsolutions.com.au/cessna-172-simulator/ I can measure stuff for you if you want! PM me for my phone number. This real fuse with the interior owes me $1200, much easier than a big construction job, something you might want to consider!

Cheers Gwyn