Cockpitbuilders.com
Main => Help and Support => Topic started by: Xpress690 on October 10, 2020, 07:46:11 AM
Hi all....
I Will like to ask for some help, sorry if this has been talked about on other post.
I´ve got a PFC Avionics Rack that is running with XPlane11-11.50 Vulknan and MSFS2020. All is good and all works fine with the exception of the bottom part of the rack (the GPS and Alt Pre-Select buttons) that I can´t find a way to program them. Thank you for your time anda all the help you can provide.
From the Azores..... happy landings
Paul
Hi Paul,
Have you tried these with an older version of Flightsim? Maybe P3D V3 or the 32 bit stuff? Or do you think you have a hardware issue?
I myself am still having issues getting all my stuff to work with 2020. I have never been an X-Plane Guy so I can't comment on that.
Trev
PFC does have a set of downloadable utilities. Have you tried that?
Steve
I found those utilities if you would like a copy.
Steve
Quote from: Trevor Hale on October 10, 2020, 09:17:05 AMHi Paul,
Have you tried these with an older version of Flightsim? Maybe P3D V3 or the 32 bit stuff? Or do you think you have a hardware issue?
I myself am still having issues getting all my stuff to work with 2020. I have never been an X-Plane Guy so I can't comment on that.
Trev
Hi Trev (canuk
Quote from: Trevor Hale on October 10, 2020, 09:17:05 AMHi Paul,
Have you tried these with an older version of Flightsim? Maybe P3D V3 or the 32 bit stuff? Or do you think you have a hardware issue?
I myself am still having issues getting all my stuff to work with 2020. I have never been an X-Plane Guy so I can't comment on that.
Trev
Hi Trev (canuk??)
Got most of the rack working with the exception of the GPS buttons (NAV-WPT-FLP-CALC-AUX and all the other buttons) as the Altitude PRE-Select....
I´m mainly a small plane pilot and it´s nice to have all the control of the plane with in reach instead of have to go on the screen with a mouse and do the changes you need. I would like to have a way of programming the darn things and be happy..
Thanks for the response and will let you know if anything changes.
From the Azores....happy landings
Paul
Quote from: n4208t on October 18, 2020, 07:43:59 AMI found those utilities if you would like a copy.
Steve
Thank you so much...
I just don´t know what to do with all of that, but thanks anyway..
Regards
paul