Does anyone have an NG IPL? I need a few part numbers, please.
Hyd brake pressure gage
Flaps position indicator
EVAC panel
3 bay pedestal for the wide format printer
EGT gage
Cockpit door panel that's on the pedestal.
HGS panel.
That's it for now. If anyone can help, I appreciate it.
Kev
Brake Pressure p/n 163LCP80
Flaps position p/n 2061-15-1
Trim and door p/n 69-76436-9
HGS p/n 1500-0500-002
Apu EGT p/n 152LMA23
Thank you!
No worries,
Evac and pedestal are customer options. The p/n for the pedestal changes depending on printer types so I don't know for certain which pedestal p/n is correct for the type of printer that you have as that style is a non illustrated part in the IPC that I have access too. That would be something that you make as a home certified stc mod using a normal pedestal :)
Evac again not illustrated but I have an old one, dont know what aircraft type is was pulled from but its a Gables p/n G-3466A
orange light and a siren always cool and dc powered
That one?
almost right jack except needs be in brown 🤪
:D
Hi, Jack,
Yes, that one!
Thanks.
Kevin
Quote from: kattz on May 21, 2020, 06:27:28 PMHi, Jack,
Yes, that one!
Thanks.
Kevin
I have the EVAC, matter of fact I got it from Jack. Is it the part numbers you need from the back panel?
Maybe Jack would be so kind as to find me one! ;D
Probably yes, the number on the rear of the panel.
Thanks.
Kevin
sure, but you have to be patient...they do show up
I am... the embodiment of patience. Well... maybe.
Speak of the devil....
just listed
https://www.ebay.com/itm/BOEING-EVAC-CONTROL-PANEL/264741072089?hash=item3da3cc2cd9:g:KEYAAOSwih5eybNQ&vxp=mtr (https://www.ebay.com/itm/BOEING-EVAC-CONTROL-PANEL/264741072089?hash=item3da3cc2cd9:g:KEYAAOSwih5eybNQ&vxp=mtr)
GO 4 IT.... :D
at 100 bucks all up take it
Yep agreed, If you dont I will, then I will fix the pull switch and put it back on ebay for double the price!