Text only | Text with Images

Cockpitbuilders.com

Main => Aircraft Dimensions => Topic started by: MLeavy737 on August 09, 2010, 07:43:53 AM

Title: P61-3, P18-1 Panel Measurement Pics
Post by: MLeavy737 on August 09, 2010, 07:43:53 AM
Hello all,
  Well, turned out i had a tape measure in my flight bag from when i did some Glare measurements. Anyhow i got some cb panel measurements from a 73-900. Also looks like the hole cutout for the cb's are 7/16 inch diameter. Hard to tell because there were no places with just the hole to measure. The caps that you see on unused cb locations are 5/8 inch diameter.

Hope this helps, good luck with the printing Jack.

Mike Leavy
Title: Re: P61-3, P18-1 Panel Measurement Pics
Post by: Sean on August 09, 2010, 09:05:59 AM
Fantastic pics Mike. It's not often we get to see this neck of the woods.

What are those funny little lines after the numbers though? Inches someone told me. What are inches???  ;D

Sean
Title: Re: P61-3, P18-1 Panel Measurement Pics
Post by: MLeavy737 on August 09, 2010, 10:09:18 AM
Quote from: sean nixon on August 09, 2010, 09:05:59 AM
Fantastic pics Mike. It's not often we get to see this neck of the woods.

What are those funny little lines after the numbers though? Inches someone told me. What are inches???  ;D

Sean

Hey if your building a sim you should be able to figure that out! lol :) Use google to convert..

Mike Leavy
Text only | Text with Images