Cockpitbuilders.com

X-PLANE (Laminar Research) => X-PLANE - General Discussion => Topic started by: sismo-support on July 09, 2020, 01:35:53 AM

Title: OrbitXP, Sismo connector for X-Plane
Post by: sismo-support on July 09, 2020, 01:35:53 AM
Hello simmers!

OrbitXP is an application developed by Sismo to be the interface between Sismo Plug&Fly modules and X-Plane 11 with Zibo mod. It's a freeware license that is:


You can download it for free from here: https://sismo-soluciones.com/en/content/24-orbitxp (https://sismo-soluciones.com/en/content/24-orbitxp)

So far, it is available for the following modules:

V1.2Modules supported:

  • MCP, EFIS V1 or superior.
  • Pedestal V2 or superior,. Includes All Zibo Modules: VHF, NAV, ADF, ATC, ACP, CAB DOOR, RUDDER TRIM, CARGO FIRE and FSP.
  • Note: WXR and SELCAL Panels are dummy in Zibo 738X

(https://scontent.fsvq2-1.fna.fbcdn.net/v/t1.0-9/106917017_3493362774031495_1566374553096623627_o.jpg?_nc_cat=107&_nc_sid=8024bb&_nc_ohc=Ddxs8WmmNuQAX_vkd0K&_nc_ht=scontent.fsvq2-1.fna&oh=ea1d8f19124e9ba59d61ebf897cd33a2&oe=5F2B04CB)
Title: Re: OrbitXP, Sismo connector for X-Plane
Post by: sismo-support on July 23, 2020, 02:32:48 AM
New release V1.3, now some MIP modules are supported too.

(https://scontent.fsvq2-1.fna.fbcdn.net/v/t1.0-9/109753474_3531040973597008_2032651388007065551_o.jpg?_nc_cat=108&_nc_sid=8024bb&_nc_ohc=ZapSKe2p-KsAX8eu_YI&_nc_ht=scontent.fsvq2-1.fna&oh=68aa2574b16bf6d6dd605d6d1c0240d6&oe=5F3E4AC0)
Title: Re: OrbitXP, Sismo connector for X-Plane
Post by: sismo-support on July 31, 2020, 12:39:11 AM
Release V1.4 already available.

1.4Modules supported:

  • MCP, EFIS V1 or superior.
  • Pedestal V2 or superior,. Includes All Zibo Modules: VHF, NAV, ADF, ATC, ACP, CAB DOOR, RUDDER TRIM, CARGO FIRE and FSP.
  • MIP V2 or superior,. Includes the following Modules: DS, AFDS, EDC, SixPacks, Master Buttons, GPWS, Landing Gear, NWS, MIP Annunciators and TEST Toggle Switch.
  • Note: WXR and SELCAL Panels are dummy in Zibo 738X
Title: Re: OrbitXP, Sismo connector for X-Plane
Post by: sismo-support on October 19, 2020, 11:55:29 PM
V2.1 Update -
MCP/EFIS -> Included in Release V1 or superior
Pedestal -> Included in Release V1.2 or superior
MIP -> Included in Release V1.5 or superior
FWD Overhead -> Included in Release V2 or superior
AFT Overhead -> Under development

Key functions:
All the modules and services included in OrbitXP V1.6.
First release of the FWD Overhead, including all the modules, but some functions still missing.
New Config file.
Some bugs of V1.6 have been amended.
OrbitXP User Manual Release 2. It will be copied in the programs folder or you can download it clicking here.
Title: Re: OrbitXP, Sismo connector for X-Plane
Post by: Jeff on December 14, 2020, 10:50:48 AM
With which Avionics software?

Thanks,
Jeff