Print Page - FDS ELEC panel

Title: FDS ELEC panel
Post by: jfuenmayor on June 01, 2014, 10:30:19 AM

Hi to all:

I have a FDS B737NG ELEC panel all wired and working with the TekWorkx .xml file.
I usually do not fly above FL300, but today, when flying from KMIA to KLGA I filed
for FL370, and when adjusting the FLT ALT in the OVH panel, I noticed that
after 32000 ft the digits would not continue increase by 500 as set in the rotary switch, but
to decrease, and the numbers were kind of odd. I also noticed that the assignment is
a pmSystems update and not Sim-Avionics one by default ( which I use ). I also looked for a SIm-Avionics .xml file for LND and FLT ALT and could not find one.

Has anybody had this problem ?.

Thanks

Title: Re: FDS ELEC panel
Post by: Jetcos on June 02, 2014, 06:13:20 AM

It actually uses the same FSUIPC offsets.

I will send you the one I use.

Title: Re: FDS ELEC panel
Post by: jfuenmayor on June 02, 2014, 09:11:09 AM

Many tanks

JF

Cockpitbuilders.com

Main => New Here..? Introduce yourself! => Topic started by: jfuenmayor on June 01, 2014, 10:30:19 AM