Will Depart in...
Started by kurt-olsson, September 06, 2015, 01:39:47 AM
0 Members and 3 Guests are viewing this topic.
Quote from: kurt-olsson on July 07, 2017, 11:25:30 AMBu the way, mickc: it looks like from some photos that you probably have the most awesome 737ng sim on the planet. Do you have any videos of it?
Quote from: Ridgenj on July 07, 2017, 01:49:40 PMMickc or Willows, do you have by chance the p/n for the white caps needed for the Honeywell interlocking switches.CheersLuis
Quote from: kurt-olsson on July 08, 2017, 06:16:52 AMHm... wonder how i can get rid of that upper "gap" between upper panel and the frame. Is this only covered in the -800 frame?And also, how on earth should i bend back the two support structures at the back?
Quote from: kurt-olsson on July 15, 2017, 09:40:16 AMMore OEM stuff.The plan is to print master caution and fire on the push-buttons.
Quote from: mickc on July 15, 2017, 02:41:19 PMQuote from: kurt-olsson on July 15, 2017, 09:40:16 AMMore OEM stuff.The plan is to print master caution and fire on the push-buttons.Any plans on getting the Fire & M/C Lights to work as switches ?
Quote from: jackpilot on July 15, 2017, 01:44:05 PM[ebay]263083560119[/ebay]Saw them off
Quote from: kurt-olsson on July 15, 2017, 10:02:01 PMYes. These are push switches. So they have a circuit for it. The problem i might end up with is that the light needs 24v and if i push them, that circuit is the same as the light so i am afraid i might burn my teensy controller (max 5v).But i am sure this could be solved with some kind of resistor etc...
Quote from: kurt-olsson on July 16, 2017, 04:48:31 AMBy the way, if anyone knows how to open these buttons to change labels i would be in great thanks.
Page created in 0.201 seconds with 32 queries.