Will Depart in...
Started by kurt-olsson, September 06, 2015, 01:39:47 AM
0 Members and 1 Guest are viewing this topic.
Quote from: Goodenough on April 30, 2016, 07:23:15 PMI know I can't add to this post and have already asked if there were any MCP builders out there...but just wanted to say by reading your posts here on theB737 MCP I'm learning more about building your own MCP...so thanks Perry
Quote from: navymustang on May 01, 2016, 04:23:44 AMPeter - not sure if you have these numbers: Throttle lever movement is 13.5 degrees / second. So a full throttle from idle takes 4.4 seconds.Jim
Quote from: kurt-olsson on June 06, 2016, 09:46:47 AMIssues now.1, dont know how the levers resistance is in the real aircraft. I need to tighten my polyclutches preeeety tight to be able to pull it back from full power to idle.
Quote from: Ridgenj on July 03, 2016, 02:09:21 AMHi Peter, you have been too quite lately. Did you test your MCP with x737?Have you been able to use the avionics directly without having to use a suite?Sent from my SM-N910T using Tapatalk
Quote from: Ridgenj on July 04, 2016, 11:51:05 AMThe backlight looks superb.I think I have an OEM switch for the A/T from MicroswitchSent from my SM-N910T using Tapatalk
Page created in 0.167 seconds with 30 queries.