Welcome to Cockpitbuilders.com. Please login or sign up.

April 15, 2021, 01:16:41 AM

Login with username, password and session length

PROUDLY ENDORSING


Fly Elise-ng
9 Guests, 0 Users
Members
Stats
  • Total Posts: 56902
  • Total Topics: 7574
  • Online Today: 13
  • Online Ever: 582
  • (January 22, 2020, 08:44:01 AM)
Users Online
Users: 0
Guests: 9
Total: 9

COUNTDOWN TO WF2021


WORLDFLIGHT TEAM USA

Will Depart in...

Recent

Welcome

737-800 Arduino X-Plane Build

Started by kurt-olsson, September 06, 2015, 01:39:47 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

kurt-olsson

Progress!!!

Same amount of evil yesterday the same amount i pushed forward.
Throttle engines and clutches remounted in better positions and also potentiometer with sprocket to read flaps.

The real aircraft has resistance, but i like the feel of flaps without any so i keep it this way. I might add a clutch if i want more tension.

kurt-olsson

September 11, 2016, 10:36:02 AM #151 Last Edit: September 11, 2016, 12:33:42 PM by kurt-olsson
Uln2803a testing.

The orange and black cable is overkill, the yellow cable said "poff"! Quite the smokecloud! Hehe. I knew it before i turned the power on but still had to test it...


I need a good awg size for 5v and 12v and 28v with max 2,5 amps and not longer than 20cm...

The boeing cables are 28v and still very very thin! Must be excellent heatshield in those cables.

kurt-olsson

Uln2803a rocks!


kurt-olsson

Let there be backlight!

kurt-olsson

I decided to cut out all the stuff from the panels i dont need.
First i didnt want to due to the masterpeace of installation from boeing, but then i figured, this part will never fly again, and i want a clean setup with the IO card inside and a nice panelmounted usb, 5 and 28v and ground connector.

So i took the plunge...

I need to figure out how to remove the korrys so i can setup with clean cables with exact length i need and thin canples for pushtest.


kurt-olsson

New panel arrived!

Upside down without gauges, but hey! 100$!

kurt-olsson

Cables cut and identified. Keeping some extra cables if my current ones fails.

kurt-olsson

Moment of truth...


kurt-olsson

Bingo!

kurt-olsson

12v or 28v and ground + usb cable. Thats it!
All mapped and interfaced. Glad i decided to put the io card inside!

Anti ice panel complete with push to test function on the korrys!




kurt-olsson


kurt-olsson

Ah man! i love the x737!!!
it has a float value of 0.0 to 1.0 of the announciator brightness!
it will be supereasy to map it with my uln2803a driver!

godspeed the x737!

kurt-olsson


kurt-olsson

Work continues!
After the smokefest yesterday i made custom duponts with the original boeing cable, so now i know the awg is ok!

The anti ice i tear apart evrything, but i will change the approach and use the current connectors. Drawback is that the teensy is on the back, but no more hassle with the wires.

kurt-olsson

September 26, 2016, 08:11:43 AM #164 Last Edit: September 26, 2016, 08:12:18 AM by kurt-olsson
Flight recorder arrived today! Aft overhead 80% complete.

kurt-olsson

Ladies and gentlemen...
We have ourselves a moving left throttle...

kurt-olsson

Created a youtube channel to keep track of progress.

http://youtu.be/6Yvud2szk9Y

kurt-olsson

September 27, 2016, 02:04:50 AM #167 Last Edit: September 27, 2016, 02:05:29 AM by kurt-olsson
Finalizing wire setup for the throttle pots and motors

kurt-olsson

September 27, 2016, 04:20:27 AM #168 Last Edit: September 27, 2016, 04:29:38 AM by kurt-olsson
Both throttles moving...
http://youtu.be/e87ZMwemau4

kurt-olsson

September 27, 2016, 10:26:35 AM #169 Last Edit: September 27, 2016, 10:27:16 AM by kurt-olsson
IRS selector position two pin multiplex code is cracked!


kurt-olsson


kurt-olsson

if i would use fsx instead of x-plane we could now hear my final words before OOM fatal crash! Hehe

jackpilot

You can get the pointer of the gage move full deflexion by applying a tiny voltage switched by the test button.
:D


Jack

kurt-olsson

October 03, 2016, 08:45:49 AM #173 Last Edit: October 03, 2016, 08:47:23 AM by kurt-olsson
Quote from: jackpilot on October 03, 2016, 08:38:14 AM
You can get the pointer of the gage move full deflexion by applying a tiny voltage switched by the test button.
:D

Cooooooool!

I didnt even think i could implement this, only the two buttons.
Will use pwm and see if i can simulate some movement. Thanks Jack!

It would be cool to use a sound-sensor and map it to the volume!

kurt-olsson

October 05, 2016, 11:09:36 AM #174 Last Edit: October 05, 2016, 11:11:21 AM by kurt-olsson
Fuel idle positions
Parking brake switch
Speed brake solution
Horn cutout switch
Trim wheels ( i am not sure if i want to implement this noisy stuff)
Trim indicators.

Thats it! Rest of the switches and funtions are connected.
I am starting to see the end of the tunnel for the tq.

Loads of fun.

For the parkingbrake i will implement flaps2approach solution. I will not implement push rudders to release, maybe if i get some rudders. Hehe

The speedbrake will be tricky. Need motor and clutch for this one i think. If i use servo i cant move it manually...


Like the Website ?
Support Cockpitbuilders.com and Click Below to Donate