Print Page - Prosim parts and Prosim

Title: Prosim parts and Prosim
Post by: WheelerEGKK on April 20, 2020, 02:20:55 AM

Hi guys,
I have the Prosimparts TCAS/XPNDR panel that uses an Arduino board. It was fine with iFly but I now use Prosim but cant grasp why its not working. Does anyone have an idiots guide to installing this?

Many thanks.

Kelvin

Title: Re: Prosim parts and Prosim
Post by: Trevor Hale on April 20, 2020, 04:04:08 AM

Have you communicated with Prosimparts? ProsimAR may use some special LVARS with regard to their Transponder functions, you may want to drop ProsimAR an email as well. Most of us that use prosimAR are running with hardware that is directly supported by their software.

However, if your Transponder is legit an arduino board, their are other ways you can get it to work through LUA scripting and FSUIPC BUT <-- There is a catch, you likely would need to replace the code on the board with your own, and that may be a challenge for some.

Try the first suggestions they are way easier. talk to the respective vendors and see what they can help you with.

Trev

Title: Re: Prosim parts and Prosim
Post by: WheelerEGKK on April 20, 2020, 05:14:05 AM

Thanks Trevor. I will try Prosimparts first.

Cockpitbuilders.com

Main => General Discussion Board. => Topic started by: WheelerEGKK on April 20, 2020, 02:20:55 AM