Cockpitbuilders.com

Main => General Discussion Board. => Topic started by: redman on November 20, 2021, 11:05:25 PM

Title: Virtual Avionics MCP & EFIS integration with X-Plane 11 ZIBO Mod
Post by: redman on November 20, 2021, 11:05:25 PM
Hello group,

I'm planning to buy a second hand MCP and EFIS set from Virtual Avionics. Unfortunately it seems their customer support doesn't work anymore due to some problems they've encountered cause of Covid.

For those of you here who have actually had any experience with these devices, I'm particularly interested if BOTH devices work with the 737 ZIBO Mod. From what I've read on their facebook site, it should work with X-Plane 11 and ZIBO under the 2.27 interface. Then again I've encountered peoples post claiming otherwise... I've also found some information that you can now control the MCP using SPAD.next as an alternative, but what about the EFIS?

To make things clear, I've read some or all of the posts on the VA gear. My question is about the possibility of making ALL the functions of the MCP and EFIS work with X-Plane 11 and ZIBO Mod... In some posts people talk of only "FEW" or "MOST" functions working. I am wondering about full integration with X-Plane.

I would really appreciate any comments and help, thank you!

Michael

[attach id=22422]Screenshot VA.jpg
[attach id=22424]Screenshot Spad.jpg