Print Page - Setting OAT through Environment (Advanced)

Title: Setting OAT through Environment (Advanced)
Post by: Trevor Hale on December 13, 2016, 02:43:26 AM

Hi Luis,

When setting OAT through the advanced window in Environment, the temperature changes right away, but after a second or 2 it sets itself back to the temperature displayed in the left window at the Aircraft. No other active weather sources are running, and Prepar3d V3 Shows (User Defined weather) Because it is being set from Istation.

Am I missing something?

Trev

Title: Re: Setting OAT through Environment (Advanced)
Post by: luisgordo on December 13, 2016, 07:43:51 PM

Hi Trev,

This should work properly - are you using the latest version (3.46)?

Let me know.

Cheers,
Luis

Title: Re: Setting OAT through Environment (Advanced)
Post by: Trevor Hale on December 14, 2016, 12:44:13 AM

Yes when I installed it I went to get the updates and noticed 3.46 was there.

I will try some more testing and let you know how I make out. Could be an issue on my end somewhere.

I will let you know after tonight if the problem still persists.

Thanks

Cockpitbuilders.com

Instructor Station by Luis Gordo (Official Forum) => Product Support => Topic started by: Trevor Hale on December 13, 2016, 02:43:26 AM