HI
I would like to know if the IS is compatible with PROSIM737.
By the moment, is the best cockpit builders software . i tun everything in just one computer.
What i want to know is how to interact between IS and Prosim.
for example, if there is a fail in a fuel pump, if prosim will detect and will light on the low pressure lights in the overhead panel.
Miguel
europa345@hotmail.com
Why ?? :D
ProSim already have a built-in dedicated instructor station that is by far more comprehensive for the B737.
Bjorn
The idea, and this is carried over from another forum, was that Istation gives you a one screen look at all the controls, a side view of speed, direction and altitude as well as mapping that data over google earth and recoring your flight path.....
ala this, which Prosim doesn't do....
hi
Prosim has failures but i would like to know if i can use it with prosim.
to have the failures of the prosim 737 for one side and in the other side use the instrucctor station of luis to se the rest of parameters and to change weather, positioned the plane, make analisis of flight and print a report.
does the instructor station have more failures than prosim?
for example, can i make to have a problem with one leg of the landing gear? or make aleirons not working?
miguel
I see, sounds like the two complete each other.
I have used IS together with PM and the environment page and position page is really good.
ProSim seems to do an excellent job regarding failures.
Exactly what can be done is best experienced by d/l ProSim I think since it at the moment is free.
Bjorn
hi
yes
prosim is free by the moment.
i want to use both toguether.
is it easy to set up in a remote computer.
by the moment, donĀ“t know if i want to install in my cockpit computer or in a remote laptop. how many licenses are provide when you buy the program?
Works via FSUIPC, very easy to load on any computer on the network.
Grab the manual off of Luis' site, it'll walk you through the available failures