Hi all,
I have a home built 737 cockpit which I am refurbishing/updating.
I'd like to add working windscreen/windshield wipers but have not been able to find a way. I use Prosim 737 but I don't need the wipers to work via Prosim.
I have investigated using dc motors and servos. The nearest I've got is finding an Arduino sketch to make a servo sweep back and forth but it's not ideal.
Has anyone done this and can share how it was done or have any ideas?
Thanks a lot
Dave
lololololol supet cool ... yes i did this ... dont do it .. why ?
A...I use all real aircraft parts so i can only give you my two cents
If using real.wipers etc you need the two motors ..no big deal ..thatd not the kicker .. then yiu will need to plumb them to water liquid reservoirs again no big deal .. then they will need to rub against the glass again no biggie .. the biggies are if no liquid they will scratch up your glass .. and where does the liquid go with out iy getting all over yiur out the window view .. then if yiu do go down this rabbit hole you may as well add window heat and foot warmers
here is solution ... use just the morors only wired to your switches this way you get the cool sound without the grief and your software should give you the wiper blade motion
Thanks for your reply Bernard.
I was not planning to have water, just the wipers. I am going to make false wipers out of balsa wood and they won't touch the glass, just sweep back and forth.
Regards
Dave
Thought about this a few years ago and how cool would it be to have a double pain windshield that is just millimeters apart, and then in between would be the wiper arm, the blade, as well as some water sprayer/mist tubing surrounding the perimeter.
Thus, it would be a self contained, encased, recycling rain effects windshield. The water and flow (psi) would be coming from small external storage tanks, with the wiper arms being controlled by large RC motors of sorts, yet keeping them away from the water. The side windows would just be rain water only.
Regarding the double pane glass and looking through it, I don't think it would be much different from looking through the real windshields. They're pretty thick in design...look at this:
https://www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=GENUINE+BOEING+747-400+FULL+COCKPIT+WINDOW+SET+%286+Windows%29&_sacat=0 (https://www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=GENUINE+BOEING+747-400+FULL+COCKPIT+WINDOW+SET+%286+Windows%29&_sacat=0)
Note: Hey Bernard, if you do not have these yet, here is your chance...lol!
Otherwise, back to Dave's idea, if we think about this concept of real wiper motion with water/rain spray, just imagine how much that would add to the flight sim experience. Additionally, it's already being done virtually through add-ons for the desktop pilots, so why not try doing it for the full size sim pilots?
Look at this: https://www.youtube.com/watch?v=MvhydZHZ9cg (https://www.youtube.com/watch?v=MvhydZHZ9cg)
Yes, it sounds kind of crazy, not really needed, hard to do, like going off the deep end, and so on; however, think about some of the other "crazy and not really needed" items that have been made, once someone does it, we wonder how we ever lived without it... :idiot:
John
@ john already have full window set thanks
Bernard, why don't you just list the things you don't have, from what I gather that would be a very short list.... :angel: ;) 8)
I am installing working wipers in my sim, and this is a great idea!
Hey Joe,
I am going to send you the wiper anyway, by what's being discussed, making 3D printable ones would be well worth doing now... :idiot:
John
Okay John,
I'll get the stl back to you as soon as it arrives. ;D
What is the largest size you can print, that will determine how I construct the 3D model.
Joe.
@ joe re the sim i have it all and its all real including nose gear landing light 😉 now for sms (console) i still need x1 red phone or a batphone would be cool