Cockpitbuilders.com
Arduino Projects => General Discussions => Topic started by: kurt-olsson on July 01, 2019, 09:37:54 PM
I am using Teensys and it works really well.
I have about 10 Teensy LC connected to my computer.
Yesterday i was working on the gear panel, and when i uploaded the sketch it was uploaded to the wrong Teensy.
I did this on 3-4 Teensys so now i have to reload the correct sketch again.
What is your approach for uploading a sketch when having multiple Teensys connected?
I use: Verify in my IDE and then press the button on my teensy to get it to upload, but its kind of a hazzle...
TYQT
Do a search
Cool!
Will look it up. Thanks!