Print Page - 737 MCP dimension

Title: 737 MCP dimension
Post by: Raymondvanderploeg on February 28, 2011, 10:14:39 AM

Hi,

What's the width size of an 1:1 scale MCP of an 737 ?

Regards,
Ray

Title: Re: 737 MCP dimension
Post by: jackpilot on February 28, 2011, 10:31:44 AM

470mm X 70mm
Probably +- mm
JP

Title: Re: 737 MCP dimension
Post by: Raymondvanderploeg on March 01, 2011, 01:28:02 AM

Aha okay.....

Yesterday I have bought a set of FlyEngravity second-hand glare wings, I will reconstruct my old desktop panels to make these glare wings fit.

But now finding some measurements,
MIP size is 151 cm ?
EFIS is 11,5 cm ?
MCP ???
Glare wings around 36 cm (average)

Regards,
Ray

Title: Re: 737 MCP dimension
Post by: jackpilot on March 01, 2011, 04:42:46 AM

MIP 152
EFIS 11
MCP 47
Wing 37
A few mm difference here and there do not really matter.
Just make sure you have minimum gap between these components ( if you have to use your own backlighting) and , most important, that the whole thing looks good!
When you build your structure better go from center (MCP) to the sides (Wings) than the opposite as you could end up with a few mm missing to fit the MCP properly.

Title: Re: 737 MCP dimension
Post by: Raymondvanderploeg on March 01, 2011, 10:01:44 AM

Hi Jack,

Thanks for the information, really needed that info!

Regards,
Raymond

Cockpitbuilders.com

Main => Aircraft Dimensions => Topic started by: Raymondvanderploeg on February 28, 2011, 10:14:39 AM