Cockpitbuilders.com
Visiting Vendor Announcements => General (NEW) Product Announcements! => Topic started by: neuman5022 on October 13, 2009, 11:59:00 AM
Hello folks
I did some massive research and hard work to find the ultimate layout of the 737-800 CB panels.
With some help from good friends I was able to make a cheap but good looking solution for all the 10 CB panels of the 737.
One solution is what I call "peel and paste" - the CB panels are printed with the correct AMPs labeling - all you need to do is to paste it on any smooth surface.
For folks with real panels - I had created the peel and paste strips - each strip is separate and can be pasted to your real panel.
I have also made a small mock-up of the CB heads to be put into the peel & paste to make it look more real.
Please e-mail me if you wish to have further info. neuman@sim-team.com
Cheers
Isaac
(https://www.cockpitbuilders.com/proxy.php?request=http%3A%2F%2Fwww.sim-team.com%2Fimage%2Fpeel%26amp%3Bpaste1.jpg&hash=92e73133a5f86163dfb45a3c20d9f12e023e3748)
(https://www.cockpitbuilders.com/proxy.php?request=http%3A%2F%2Fwww.sim-team.com%2Fimage%2F737lable.JPG&hash=125547c1c400e3a0cfe9f54962842463b14d511e)