Title: B737: measures from sidewall
Post by: MjTom on January 04, 2016, 03:49:57 AM
Post by: MjTom on January 04, 2016, 03:49:57 AM
Hallo
First, I wish you all a Happy New Year !
The last few weeks I have been very diligent.
(http://www.directupload.net/file/d/4223/yuqu3bch_jpg.htm)
But now, I need some Measures to finish the sidewalls.
I would be glad if you had some information.
1. the cutout for the lighting from the circuit breaker:
(http://www.directupload.net/file/d/4223/cz2pew2e_jpg.htm)
2. the center of axis from tiller to make the drilling:
(http://www.directupload.net/file/d/4223/g8s9frjf_jpg.htm)
Thank you, Thomas
First, I wish you all a Happy New Year !
The last few weeks I have been very diligent.
(http://www.directupload.net/file/d/4223/yuqu3bch_jpg.htm)But now, I need some Measures to finish the sidewalls.
I would be glad if you had some information.
1. the cutout for the lighting from the circuit breaker:
(http://www.directupload.net/file/d/4223/cz2pew2e_jpg.htm)2. the center of axis from tiller to make the drilling:
(http://www.directupload.net/file/d/4223/g8s9frjf_jpg.htm)Thank you, Thomas
Title: Re: B737: measures from sidewall
Post by: Buster99 on January 05, 2016, 03:21:31 AM
Post by: Buster99 on January 05, 2016, 03:21:31 AM
Hello Thomas,
I have the dimension for the total tiller height (I do not have distance A in your picture).
The center of the tiller axle is 57.5 cm from the bare cockpit floor.
This was measured from an actual stripped 737-600NG flight deck (see attached picture which is CPT side)
I hope this helps,
Best Regards,
Marc
I have the dimension for the total tiller height (I do not have distance A in your picture).
The center of the tiller axle is 57.5 cm from the bare cockpit floor.
This was measured from an actual stripped 737-600NG flight deck (see attached picture which is CPT side)
I hope this helps,
Best Regards,
Marc
Title: Re: B737: measures from sidewall
Post by: MjTom on January 05, 2016, 05:04:04 AM
Post by: MjTom on January 05, 2016, 05:04:04 AM
Hallo Marc, thank you for answer!
57,5cm viewed from insinde looks perhaps a little bit too deep.
Is it possible, to get the measures from inside (the yellow arrows)?
My dimensions from sidewall are approximately +/-1% by the originals.
Thus, I expect a good result from measures from inside.
(http://www.directupload.net/file/d/4224/25v7j799_jpg.htm)
I envy you for your real cockpits ^^.
only chance for me to get: go to EDFH and dismantle a parket B738 from Rynair....Tony Ryan has enough of them.
"sorry" for the inconvenience, I´ll try as real as possible.
so long, Thomas
57,5cm viewed from insinde looks perhaps a little bit too deep.
Is it possible, to get the measures from inside (the yellow arrows)?
My dimensions from sidewall are approximately +/-1% by the originals.
Thus, I expect a good result from measures from inside.
(http://www.directupload.net/file/d/4224/25v7j799_jpg.htm)I envy you for your real cockpits ^^.
only chance for me to get: go to EDFH and dismantle a parket B738 from Rynair....Tony Ryan has enough of them.
"sorry" for the inconvenience, I´ll try as real as possible.
so long, Thomas
Title: Re: B737: measures from sidewall
Post by: MjTom on January 08, 2016, 02:55:10 AM
Post by: MjTom on January 08, 2016, 02:55:10 AM
Hallo
I want to show you one of my modes of operating if I have no or no real measures.
I only need a good photo with ruler...that's all the help I need, nothing spectacular.
one photo from my HC and one from original
(http://www.directupload.net/file/d/4227/d6spwg96_jpg.htm)
moved and adjusted
(http://www.directupload.net/file/d/4227/9vzh29yj_jpg.htm)
one above the other
(http://www.directupload.net/file/d/4227/lgevhomn_jpg.htm)
In this way I am 100% on original.
so, a small photo spared massive work.
thanks to all, who make it possible.
so long, Thomas
I want to show you one of my modes of operating if I have no or no real measures.
I only need a good photo with ruler...that's all the help I need, nothing spectacular.
one photo from my HC and one from original
(http://www.directupload.net/file/d/4227/d6spwg96_jpg.htm)moved and adjusted
(http://www.directupload.net/file/d/4227/9vzh29yj_jpg.htm)one above the other
(http://www.directupload.net/file/d/4227/lgevhomn_jpg.htm)In this way I am 100% on original.
so, a small photo spared massive work.
thanks to all, who make it possible.
so long, Thomas
Title: Re: B737: measures from sidewall
Post by: quid246 on January 08, 2016, 06:09:33 AM
Post by: quid246 on January 08, 2016, 06:09:33 AM
If you can wait until next week, I'll take measurements from a real NG.
Title: Re: B737: measures from sidewall
Post by: Buster99 on January 08, 2016, 11:29:07 AM
Post by: Buster99 on January 08, 2016, 11:29:07 AM
Hello Thomas,
57,5cm is the correct measurement from the bare floor to the center of the tiller axle.
Measured from real 737-600NG, alas, not mine!
I do not know how this translates to your setup, that is something you will have to compare and adjust as necessary.
HTH, Marc
57,5cm is the correct measurement from the bare floor to the center of the tiller axle.
Measured from real 737-600NG, alas, not mine!
I do not know how this translates to your setup, that is something you will have to compare and adjust as necessary.
HTH, Marc
Title: Re: B737: measures from sidewall
Post by: MjTom on January 08, 2016, 11:48:50 AM
Post by: MjTom on January 08, 2016, 11:48:50 AM
~57cm is definitly the correct measure.
I now have all what I need to finish the sidewalls.
thanks a lot to all !
the next phase of construction: fill in.
I will keep you up to date.
so long, Thomas
I now have all what I need to finish the sidewalls.
thanks a lot to all !
the next phase of construction: fill in.
I will keep you up to date.
so long, Thomas