Print Page - 737 Nav Radio

Title: 737 Nav Radio
Post by: Bob Reed on January 17, 2017, 11:39:09 AM

I am in need of one nav radio, anyone have one they do not need?

Title: Re: 737 Nav Radio
Post by: fsaviator on January 21, 2017, 07:55:16 AM

What are you using for an MCP? I THINK I have a one of the old CP Flight Nav radios (Not scale) that requires a CP Flight MCP connection via the usual 5-pin cable.

If you think you can use it I'll dig through the garage and find it

Title: Re: 737 Nav Radio
Post by: RayS on January 21, 2017, 10:59:11 AM

I have a Go-Flight 266 module that I modified to fit into a Sperry 1048 NAV radio. It's not DSUZ-friendly, but it's your if you want it.

Title: Re: 737 Nav Radio
Post by: Bob Reed on January 21, 2017, 01:52:07 PM

Hey Warren, I am using an old PFC MCP. It is serial and works pretty good. So although I appreciate the offer, I do not think I can use it.

Quote from: fsaviator on January 21, 2017, 07:55:16 AM
What are you using for an MCP? I THINK I have a one of the old CP Flight Nav radios (Not scale) that requires a CP Flight MCP connection via the usual 5-pin cable.

If you think you can use it I'll dig through the garage and find it

Title: Re: 737 Nav Radio
Post by: Bob Reed on February 01, 2017, 11:38:53 AM

Anyone else? I just need one.

Title: Re: 737 Nav Radio
Post by: Caflyt on February 01, 2017, 12:11:50 PM

Bob,
I have a cockpit sonic NAV and an ADF.
I will get you a picture soon.

Craig

Title: Re: 737 Nav Radio
Post by: Caflyt on February 01, 2017, 12:30:16 PM

Here is what I have from cockpitsonic
Driver is here: http://cockpitsonic.de/driver (http://cockpitsonic.de/driver)

"B737 Driver Software "

They worked great with FSX but I have never tried them with P3d.!!!

Cockpitbuilders.com

Classifieds => Wanted Items => Topic started by: Bob Reed on January 17, 2017, 11:39:09 AM