Cockpitbuilders.com
Main => General Discussion Board. => Topic started by: Reco on January 13, 2022, 04:15:40 PM
Happy New year all
I am rewiring my Bodnar board for my MD500e simulator.
I have the BU0836X, encoder software and Rotary encoder CTS 288
I have wired the encoder to 1 and 2 set the config to 1:1
In the windows joystick calibration tool, it tells me that button 1 and 2 are working, so far so good
When I go into fsuipc and assign the encoder the button combination shows 0 and 1 when I turn the encoder
Is this correct? shouldn't fsuipc show 1 and 2
Some what confused
Regards
Rhys
If I recall, Windows enumerates joystick buttons starting at 1, and FSUIPC at 0.
Agree with Ray.
Hi guys
Thank you for the reply. Does the encoder config software recognize that
It's still 1 and 2 even if fsuipc shows 0 and 1
Cheers
Rhys
Quote from: Reco on January 15, 2022, 08:44:24 AMHi guys
Thank you for the reply. Does the encoder config software recognize that
It's still 1 and 2 even if fsuipc shows 0 and 1
Cheers
Rhys
Only way is to try it out... :-)