What is a good source or link to get the 10.4 LCD screen and vga interface for lower DU these days?
Thanks,
Scott
Scott, got mine from FDS, not cheap but good because you can read in almost every position which was not possible with my old Chinese one.
Cheers
Luis
Sent from my iPhone using Tapatalk
Scott,
The forum link below shows my results with a 10.4" LCD from Pyle. It is VGA ready out of the box. I use them for the upper and lower EICAS in my sim.
http://www.cockpitbuilders.com/community/index.php?topic=2175.msg16846#msg16846 (http://www.cockpitbuilders.com/community/index.php?topic=2175.msg16846#msg16846)
(https://c2.staticflickr.com/6/5710/20805906746_7c1cb952a6_b.jpg)
(https://c2.staticflickr.com/6/5571/15261861665_853c1b8f18_b.jpg)
Robert
I've gotten a couple 5" LCDs to retrofit my OEM ERJ145 RMUs, as well as a 10" for the EICAS, from this guy on eBay:
seller:chinatobby2011
Fair prices, fairly fast shipping (comes from China and I've gotten mine in about a week or so) and he has all kinds of sizes available, along with the controller boards and power supplies needed. I'm pretty happy with mine thus far.
Here's a pic of one of my RMUs thus far. I hope this helps!
Marco
Quote from: Erj145sim on April 25, 2017, 08:16:37 PM
I've gotten a couple 5" LCDs to retrofit my OEM ERJ145 RMUs, as well as a 10" for the EICAS, from this guy on eBay:
seller:chinatobby2011
Fair prices, fairly fast shipping (comes from China and I've gotten mine in about a week or so) and he has all kinds of sizes available, along with the controller boards and power supplies needed. I'm pretty happy with mine thus far.
Here's a pic of one of my RMUs thus far. I hope this helps!
Marco
Thank you Marco. That is good to hear because I found the same supplier and just ordered a 10.4 from them. Glad to hear your satisfied. Oh, and that RMU is fantastic!
Scott
Thanks Scott!! I hope your new LCD will work out well!
As you know so well, taking OEM parts and making them work can be quite a challenge! My sim is progressing ok, though, with the RMUs being the first integrations, followed by the CD-815 FMS. Pic attached. It's taken me a while but I am finally moving forward!
All the best,
Marco