Cockpitbuilders.com

Main => Simulator Hangars => Topic started by: blueskydriver on September 19, 2015, 06:31:59 AM

Title: Simulator Hangars Section
Post by: blueskydriver on September 19, 2015, 06:31:59 AM
Hey Everyone,

Just want to point out this Cockpit Builders Sub-section again, as I think the original post made it sound like it was only about "Blueskydriver's Simulator Hangar". This section is about the spaces that you place your simulator into, as well as getting it there or removing it to relocate it. You can discuss building sheds, converting a room in the house or the garage, installing electrical, installing HVAC, or anything regarding the trials and tribulations of where your simulator is sitting

Any tidbits that will help other members would be certainly appreciated...

John
Title: Re: Simulator Hangars Section
Post by: Bob Reed on September 19, 2015, 09:15:40 AM
Well for me I needed to find a very large shoe horn.. I think most of you know what I am talking about. As I bring the sim back online over the next couple pf weeks, I will post more about the area my sim takes up lol.
Title: Re: Simulator Hangars Section
Post by: fsaviator on September 19, 2015, 10:45:37 AM
I'll be adding some stuff on here over the next week or so
Title: Simulator Hangars Section
Post by: blueskydriver on September 19, 2015, 08:05:18 PM
Karen and I spent the whole day demolishing two outside 8x10 sheds in preparation for the new hangar. Pictures of us playing demo crew will be forthcoming. This coming Tuesday is the ground breaking day and we plan too setup a time lapse camera to capture the entire build. It won't be like watching Eagles in a nest, but it will be interesting too capture and watch the process of building a shed type building.

If you ever plan to have a building built make sure the area it's going into is suitable, which sounds easy and obivous. However, there a lot of things we didn't know, but found out by discussions with the contractor. For example, water runoff and drainage, snow and wind loads, mil thickness of the metal used, screws versus nails (always use screws), roof vent ventilation even when heating and/or cooling are included, amount of heavy equipment involved and how they access the area (our blacktop driveway might be damaged by all of this), neighbors opinions do matter, and of course all the building permits, if any (lucky for us there are no permits required for a non-living space shed).

Keep following this thread too see what happens next,

John
Title: Re: Simulator Hangars Section
Post by: Joe Lavery on September 24, 2015, 11:54:37 AM
John, I wish we had such relaxed planning laws in the UK, we have to apply for an anything over the size of a dog kennel.... ::) ::) ::)

But I agree the thought process before laying a brick is an important stage in the process. I hope to be following this path in the not too distant future. When I eventually get round to it, I'll post the pics etc. here.

Joe.