Smart Sim Tech's 2nd card has finally been completed, the card will come with 2 revisions
The picture above (minus the missing components in the middle) is the R2 or lite version of the card
Revision 1 - $85.00> 3 groups of 8 outputs, each having a jumper to select either a 12v, 5v, or Custom Output
> On-board adjustable power supply (Max 1A) that can provide a custom output voltage from 1.2v to 11v
> Board is powered by external 12v power supply
> Max Amp Output is 1A for the entire card
> 24 LEDs to show status of outputs (has jumper to disable)
Revision 2 - $70.00> 3 groups of 8 outputs, each having a jumper to select either a 12v or 5v output
> Board is powered by external 12v power supply
> Max Amp Output is 1A for the entire card
> 24 LEDs to show status of outputs (has jumper to disable)
Due to the amount of emails we have received about when this card would be ready, we have decided to offer pre-orders on our website later this week. For the first run we only ordered a small lot of boards. The boards will be ready for shipment in about 2 weeks. Just waiting on some parts from mouser and a few more tweaks in the software. While the boards are in pre-order we will have them marked at $5.00 off.
Thanks,
Tyler Reed
A few people have asked me about using this card to drive something like a 24v light. I came up with a breakout board that would allow you to use from 0 to 50 volts. More info on our website http://www.smartsimtech.com/products/output-cards/ssto8b.html (http://www.smartsimtech.com/products/output-cards/ssto8b.html) I plan on releasing the schematic for this as well as ordering some boards for this soon.
Thanks,
Tyler