Print Page - Instructor station on windows surface

Title: Instructor station on windows surface
Post by: moreerc on January 21, 2016, 10:00:51 AM

Anyone able to link windows surface to the computer and run instructor station from it? If so how do you link the surface with the computer for it to operate

Thanks for your responses in advance

Title: Re: Instructor station on windows surface
Post by: Trevor Hale on January 21, 2016, 11:24:44 AM

I am sure it would work if you configured "Wide Client" On the surface.. Luis can likely confirm this though.

Trev.

Title: Re: Instructor station on windows surface
Post by: moreerc on January 21, 2016, 03:55:07 PM

Yea my experience with wideclient is like zero so i will wait around for Louis. Thanks for your response

Title: Re: Instructor station on windows surface
Post by: luisgordo on January 28, 2016, 03:43:23 AM

Hi there,

I would first try to run iStation natively on the device. Are you running Windows RT or Windows 10? This should work nicely that way.

I have no direct experience installing on Microsoft Surface - let me know how it goes.

Best regards

Title: Re: Instructor station on windows surface
Post by: julianknaf on February 05, 2016, 08:43:24 AM

Hi,

you could also run the Prosim Instructor Station if you're using prosim :D
To open it just go in the webbrowser and type the IP of your Prosim Server PC and a :8080 at the and. Voilá you have the instructor station.

But again it's just for prosim...

Julian

Cockpitbuilders.com

Instructor Station by Luis Gordo (Official Forum) => Product Support => Topic started by: moreerc on January 21, 2016, 10:00:51 AM