Text only | Text with Images

Cockpitbuilders.com

Project Magenta - Unofficial => Boeing Software - Discussion => Topic started by: GSalden on October 04, 2016, 04:04:58 AM

Title: PM Systems - onscreen yaw damper switch goes to off
Post by: GSalden on October 04, 2016, 04:04:58 AM
Recently I updated all PM modules.

I now have the issue that when turning on the yaw damper switch it immediately goes to off...
This is with the engines running.

All suggestions are welcome.

Thanks,
Gerard
Title: Re: PM Systems - onscreen yaw damper switch goes to off
Post by: Bob Reed on October 06, 2016, 07:00:45 PM
I have this same issue. I just have not tackled it yet.
Title: Re: PM Systems - onscreen yaw damper switch goes to off
Post by: GSalden on October 07, 2016, 01:14:36 AM
This can be an IRS issue.
The IRS posittion when I set the airport in the CDU is slightly different than what the IRS shows.
This can be seen on the same CDU page too.

I snet a tickt to PM 4 days ago, but no reply yet  ( Last time I got an answer on a ticket after 5 months... )

Text only | Text with Images