[Project Magenta Glass Cockpit INI file] Build#513 [Display] Title=Off / Enables/Disables Title Bar. WindowName=Project Magenta Glass Cockpit - Build 513 / You can set the name in the Title / Bar here. Topmost=Off / Will set the GC program on top / of any other window. FSWindow=Off NoFrame=Off / Will not draw the windows frame / around the Glass Cockpit when Title / is Off SecondaryDisplay=-105 / X position on multiple Window display [OpenGL] Quality=Hi / When set to Hi, the display quality / is higher, enabling font and line / smoothing FontSmoothViaLines=Off SmoothLineWidth= 1 DrawLineWidth= 1 FontSmoothViaPolygons=Off / The fonts can be smoothed by drawing / lines around them or trying to / smooth the polygons, this depends / on your graphics driver BitmapSmooth=Off / If your graphics driver allows / it, the bitmaps can be smoothed PolygonSmooth=On / If your graphics driver allows / it, the polygons can be smoothed Font=pmbgc / For Backwards compatibility only. FontFactor= 1 / Defines the font factor, 1.1 would / be 10% larger NavFontFactor= 1 / Defines the font size on the ND / display FontQuality= 100 / From 0 to 100%, where 0 is fastest / display, 100 highest quality Benchmark=On / Runs the Benchmark test on startup / (if not connected) DemoFlight=Off / Disables demo flight mode when / not connected to FS Rotate=No / Allows rotation of all displays / (Left/Right/No) [Network] Type=CDU / Sets the Aircraft Configuration / file, set it to CDU if you want / to control it from there, otherwise / reference a file, such as B747400 / for B747400.TXT AircraftType=b737-800 / Overrides the settings in the aircraft / configuration file, you can set / this to 737 for some different / behaviour (not recommended) ForceEFIS=737EFIS / Allows you to force the EFIS display / for the 737 and 767 for two engine / aircraft / This can be 737EFIS, 767EFIS and / 767EADI and STEAM LightingEffects=Off / This is for night lighting effects / for standby and steam gauges EFIS737NoBox=Off / Draws no boxes around altimeter, / HSI and speed indication, changes / position of BARO/DH AnalogHorizon767=Off / When 767 mode is selected, old / type analog horizon is used [User] StretchYAxis= 1 / Allows you to stretch the Y axis / of the image - may cause unwanted / graphical constructs. StretchNDYAxis= 1 / Allows you to stretch the Y axis / ND NDMode=MA / Last saved ND Mode if 8 Modes (i.e. / not Classic ND) are selected AllowOldND=Off / When set to Off, only 8 mode ND / can be selected - for reverse compatibility / set it to On/Yes. RMIinAPPND=Off / Will display the RMI to a VOR in / the VOR/APP mode of the ND PlanCtrOnly=Off / ND Plan mode will not allow Arc / - just CTR UseTimer=Off / This will slow down the Glass Cockpit / and give more processor time to / other programs UseTimerFPS= 0 / Approximate target FPS for the / UseTimer option / UseTimer must / be On SmoothValues=On / Will dampen heading, altitude, / pitch and bank values Log=On / Error and access logs are saved / to PFD.LOG Overview=On / Will display current settings on / the ND after starting up Framed=Off FrameFile=frame747256.img / Will draw the frame referenced / in 'Framefile' around the instruments FrameFileEICAS=frame747256.img / Placeholder/INOP LockDisplays=On LockKeyboard=Off / Disables the movement of the Instruments / and/or Keyboard input GreyTape=Off / Blue or Grey background on the / PFD Horizon=Brown Sky=Light / Controls the colours of the artificial / horizon (red/brown/dbrown/orange/green) / for the lower part and (light/dark) / for the lower part SkyRGB= HorRGB= StdBySkyRGB= StdByHorRGB= / You can set your own (R)ed (G)reen / (B)lue components for the horizon, / e.g. 0000FF is full blue, 88FF00 / is part Red and full Green FD=Cross / Saves the type of flight director / that is selected HideFlapLim=Off / Hides Flap Limit Indicators (deer / antlers in PFD) FDAlignCenter=Off / Aligns the flight director in the / center of the black box, otherwise / on top of it HorizonX= 1 HorizonY= 1 / Factor that allows you to stretch / the attitude indicator in the PFD / horizon by a factor, i.e. 1.1 is / 10% more NewPFDNDRatio=Off / Allows you to change the PFD and / ND Ratio to 1:1 X:Y - for use without / 'frames' OldFuelGauge=Off / Displays old NG Fuel Gauge with / Arcs NoFFOnUpper=Off / Removes Fuel Flow display on main / upper EICAS NoFFOnUpper2=Off / Removes Fuel Flow display all upper / EICAS YDDisplay= / Controls Yaw Damper display, =Off / -no display =(nothing) old display, / =On amber when YD off DH= 200 / Sets decision height if MCP is / not running DHTimeout= 0 / Sets the timeout for DH display WriteQNH=On / Will write QNH to sim (home/end / keys) NGNDColours=Off / Blue navaids in DN when set to / on NoQnhBox=Off / On simulators without an STD pushbutton, / will not box QNH upon passing transition / altitude ShowMCPAltitude=Off / Will always display the MCP selected / altitude and not the CDU constraints NoLNAVArm=Off / Will show LNAV on ground and no / LNAV armed mode is displayed MinRadioAlt= 0 / Sets the minimum radio altimeter / readout, allowing it to be negative CoPilot=On / Set Copilot=On if you want the / Glass Cockpit to display the first / officer instruments CoPilotF/D=Off / Allows first officer F/D to be / set independently DisableCoPilotQNH=Off / Will disable F/O QNH and Decision / Height Setting (will be same as / captain) UseCoPilotOBS=Off / OBS for NAV2 controls the Copilot's / ND display RefBankClean= 25 RefBankFlaps= 25 / Autopilot reference bank during / turns when clean or when flaps / are set MinIAS= 0 / Minimum IAS to be displayed on / the Speed Tape SpdNoGForce=Off / Minimum IAS to be displayed on / the Speed Tape StartElecOff=Off StartElecAvionics=Off / Switches off the displays until / either a key is pressed or the / offset 0X510 is cleared / It can also check the Avionics / Flag within FS and enable the instruments / one after the other ShowChrono=Off / Will display the Chronometer (analog) / on the F1 and F4 pages, move and / size using Right-Click Drag and / Numeric Keypad + and - StandByOnPFDND=Off / Displays the standby instruments / all pages, even those withour an / EICAS display StandByPage7=Off / Displays the standby instruments / on the F7 page StandByHorizonCorners=Off / Allows you to enable or disable / the rounded corners in the Standby / Horizon instrumenr StandbyRMICapt=Off / Standby RMI uses Captain side VOR/ADF / selector ISIS=On / Enables the Integrated Standby / Instrument System (disabling all / others) StandBySpdAltRMI=On / Enables the combination Horizon, / Speed/Altitude, RMI as opposed / to Horizon, Speed, Altitude StandByBorders=On / Displays borders around standby / gauges for non-bezeled displays StandByFlapIndicators=Off / Will display LE FLAPS TRANSIT/EXT / below analog flap gauge TrimGauge=Off FlapGauge=Off / Displays Analog Flap/Trim Gauge / in EICAS page FlapGaugeHide=Off / Displays Flap Gauge only when shown / on EICAS page AnalogHorizon=Off / Old type analog horizon on Standby / page 45DegreeTick=Off / Displays tick every 45 degrees / in ND Rose modes ExpandedF6=Off / Exp. F6 Page display with Captain / & F/O PFD/ND (test) RunwayLineNM= 15 / This sets the length of the runway / extension line in the ND AirportsAlways=Off / Displays airport information in / the ND at all ranges NavsAlways=Off / Displays all Navaid information / in the ND at all ranges ShowSweep=Off / Show weather radar sweep NDEng=Off / Displays ND and EICAS on the F9 / page Kgs=Off / Weight units if not defined in / the CDU IgnoreEngineStartParam=Off / Will ignore any Lapse and Startup / Parameters for N1, N2, EGT (QuickStart) NoEngineValueBuffering=Off / Will use straight unbuffered FS / values for N1, N2, EGT FuelFlowMax= 12 / Max Fuel Flow (to reset use 0) EPR=Off / Displays EPS instead of N1 on 747400 / EICAS HideN2=Off / Hides N2 display on Upper 747400 / EICAS RMIModeMap=On / Displays the RMI in the ND Map / Arc mode DoubleAVSelect=Off / Allows separate control of the / Standby RMI with Shift-E and Shift-S HUDMode=Off / Activates Head-Up Display Mode / on F1 Page HUDMirror=Off / Mirrors Head-Up Display ShowMCPValues=Off / Displays the selected MCP values / above the EICAS NoDimming=Off / Disables the dimming of the displays ThrottleBug=On / Enables/Disables the N1 Gauge Commanded / Thrust Limit Bug (green V) CommandSector=On / Enables/Disables the N1 Gauge Commanded / Thrust Sector Display ThrustRate=On / Enables/Disables the N1 Gauge Thrust / Rating Display NoWindOnGround=On / Disables wind dir/spe display on / ground or < 45 ft HideGear=On HideFlaps=Off / Will hide Gear/Flap display depending / on flight situation AlternateTrim=On / Alternate Trim Display (747-800 / style) HideFreeze=Off / Will hide SLEW/FREEZE display in / PFD LowerEngineActive=Off / Set when lower engine page is active / on F3 EngineGauges=Round AdvDisp=Off / Displays AdvDisplay (by Peter Dowson) / texts above the EICAS ShowControls=Off / Displays flight controls and other / information on the EICAS page NoMessages=Off / Completely disables any EICAS messages / when switched on EnginePage4Offset= 1000 IgnoreMCPEFIS=Off / Ignores MCP-selected EFIS settings KeyboardLights=Off / Keyboard lights will light up when / there is a Warning/Caution NDArc=On / Will draw circles for the ranges / in the ND (non 747-display) NDArcTCAS=On / Will draw circles for the ranges / in TCAS mode only NDMapHDG=Off / Sets MAP to HDG up instead of TRK / up North360=On / When switched On it will set 36 / or 360 for North rather than 0 TCASRange= 40 TCASAltRange= 0 / Sets at which distance (NM) and / altitude (feet difference) other / aircraft are shown when TCAS is / active TCASTimeout= 30 / Sets the timeout for the reading / of all aircraft data for TCAS, / might have to be set higher on / very slow systems TCASRing=On / Disables the Direction Ring in / the TCAS ND Display TCASAlertAltDiff= 300 TCASAlertNM= 3 TCASAlertSound=On TCASWarnNM= 5 TCASWarnSound=Off / With these parameters you can control / the warning sounds in pmSounds / and the threshold for TCAS warnings / and alerts TCASFontFactor= 1 / Sets the font factor of the TCAS / display, e.g. 0.8 for 20% less TCASNoCallSign=Off / Will not display the callsigns / of the aircraft TCASCallSign=Off / Will allow TCAS Callsign display TCASOnOffOnly=Off / Will only switch TCAS on or off / when modes are switched ShowV1onGround=Off / Displays V1 instead of VR on the / ground Magenta=Light / Magenta hue Light/Dark Green=Light / Magenta hue Light/Dark AoAMax= 16 AoAShow=Off / Display Angle of Attack RoundAGL=Off / Will display AGL top right in PFD / and disables Angle of Attack display UseTipasMain=Off / for 747 will use Tip Left/Right / fuel tanks as MAIN1 and MAIN4 tanks NoAltDisagree=Off / Disables ALT DISAGREE warning when / First Officer and Captain baro / do not match [Terrain] TerrActive=Off / Enables/Disables EGPWS/Terrain / display TerrMode= 1 TerrColour= 0 Terr3D=Off TerrSize= 0 TerrSmooth=Off [Internal] FlightControls=Off EsaP=Off OsaC=Off NoMenu=Off DoCst=Off [Flaps] FlpC1= 0 FlpD1= 0 FlpT1=UP FlpC2= 5 FlpD2= 1 FlpT2=1 FlpC3= 10 FlpD3= 2 FlpT3=2 FlpC4= 15 FlpD4= 5 FlpT4=5 FlpC5= 20 FlpD5= 5 FlpT5=10 FlpC6= 25 FlpD6= 15 FlpT6=15 FlpC7= 30 FlpD7= 5 FlpT7=25 FlpC8= 35 FlpD8= 30 FlpT8=30 FlpC9= 40 FlpD9= 40 FlpT9=40 [Menu] MenuX= 123 MenuY= 44 MenuZ= 20 ControlsX= 0 ControlsY=-240 ControlsZ=-400 [Keys]=UCGRDI Key=VKJSUO43