Print Page - Info needed on SYS board connectors

Title: Info needed on SYS board connectors
Post by: shaneb on January 07, 2011, 11:12:11 AM

Hey guys,

I am starting to interface some of my panels and am using SYS boards. Do any of you know where I can find the same type plastic connector that is used on the SYS boards (the connector on the end of the wiring provided with the boards) I know that it is a 10 pin connector - one slot not used) What I am trying to find is a male and female connector. I would also like to find a male connector that is not designed to solder to a board . . that I could use as a connector near my panels so I can remove the panel easily. If any of you know where I can find these connectors or have info I would really appreciate a link.

Thanks,

Shane

Title: Re: Info needed on SYS board connectors
Post by: ETomlin on January 07, 2011, 11:24:10 AM

I bet PC or Steve knows :-)

Title: Re: Info needed on SYS board connectors
Post by: fdspcos on January 07, 2011, 02:55:38 PM

Shoot us an email. We don't bite!
PCos
Flightdeck Solutions

Title: Re: Info needed on SYS board connectors
Post by: shaneb on January 07, 2011, 03:15:48 PM

Hi Peter,

Sent you an email . . just thought I would post here first thinking someone may have a source.

Thanks! ;D

Cockpitbuilders.com

Main => Builders Discussions => Topic started by: shaneb on January 07, 2011, 11:12:11 AM