Print Page - 737 Rudder system

Title: 737 Rudder system
Post by: jackpilot on January 12, 2011, 09:37:44 AM

Embarking on the project.
I decided not to use the pivot system but a sliding movement for back and forward.
I ordered two of these sliders with 300mm long 16mm section rails.
Interfacing via magnetic sensors for this and slider pots for brakes
I will post pics on progress as I did with the TQ.

(Scott/Mau: this post is actually a self motivating plot... :D )

Title: Re: 737 Rudder system
Post by: XOrionFE on January 12, 2011, 02:42:01 PM

It's working :-)

Good idea there....

Scott

Title: Re: 737 Rudder system
Post by: Maurice on January 12, 2011, 06:09:02 PM

I always knew you'd find an easier way you lazy bum ;D

Maurice

Title: Re: 737 Rudder system
Post by: ivar hestnes on January 12, 2011, 08:09:43 PM

Nice piece of hardware there Jack :)

Looks expensive though...

Cockpitbuilders.com

Main => Builders Discussions => Topic started by: jackpilot on January 12, 2011, 09:37:44 AM