Text only | Text with Images

Cockpitbuilders.com

Main => Builders Discussions => Topic started by: Vectro on May 04, 2011, 08:03:07 AM

Title: Cessna modified VC view + wings - problem solved
Post by: Vectro on May 04, 2011, 08:03:07 AM
Hi,
we are using a modified virtual cockpit view with prop only and on top we have modified 2D instrument panel as a wings:


My problem is that I always have to press SHIFT+1 to add the wings view manually on top of virtual cockpit.

I also attached the same setup with default views before modifications to make it easier to understand our setup.

Is there any way to save the 2D gauge panel on top of virtual cockpit view? After the flight is saved and reloaded the 2D instrument panel has disappeared.

BR,
OP
Title: Re: Cessna modified VC view + wings - help needed
Post by: Vectro on May 04, 2011, 08:16:58 PM
If this kind of window saving is not possible from FS2004 settings, maybe this kind of keycommand combination could be run via FSUIPC instead (by combining SHIFT+1 keys). This way it would automatically load the wings on top of virtual cockpit wing right after the flight have been load.

/OP
Title: Re: Cessna modified VC view + wings - help needed
Post by: Vectro on May 05, 2011, 11:02:47 AM
Hi,

It seems that I managed to solve the problem. If the background/VC cockpit is in 'maximize window' mode, the 2D panel (wings) cannot be saved and reloaded.

Once I took the 'maximize window' mode off everything is saving and reloading perfectly.

The printscreen is just a snapshot from my home/test computer.

Text only | Text with Images