Text only | Text with Images

Cockpitbuilders.com

Main => General Discussion Board. => Topic started by: roarkr on January 17, 2014, 03:05:08 AM

Title: How far does the Gear Handle stick out from the MIP wall on a B737-800
Post by: roarkr on January 17, 2014, 03:05:08 AM
How far does the Gear Handle stick out from the MIP wall on a B737-800?

See attached image.
Title: Re: How far does the Gear Handle stick out from the MIP wall on a B737-800
Post by: jackpilot on January 17, 2014, 10:33:53 AM
Just short of the lettering ! (L. Override)
See real pic.
Title: Re: How far does the Gear Handle stick out from the MIP wall on a B737-800
Post by: Karl737 on January 17, 2014, 01:40:03 PM
Measured at a right angle from the lightplate, and with the lever in the off position, 125 mm
Title: Re: How far does the Gear Handle stick out from the MIP wall on a B737-800
Post by: jackpilot on January 19, 2014, 06:01:07 AM
It really depends on the scale of your part vs the real one (a few mm +or - are of no real importance) and also on the way it is bolted to the frame. In any case it is a highly cycled part and has to be very tightly secured to the MIP base.
;D
Text only | Text with Images