Cockpitbuilders.com
Main => Builders Discussions => Topic started by: GSalden on May 13, 2014, 09:37:41 AM
Hi everyone,
Just finished my motorized tq with Phidgets hardware for my Ifly CBE.
- 3 servos for the 2 throttles and speedbrake
- 1061 IO board
- 1064 IO board
- 0 / 16 / 16 board
Both throttles and the speedbrake are working fine.
To operate the throttles I want to use the 7 values from offset 94DE to drive the AT.
Nowhere in the Fs2Phidgets 4.65 manual I can find anything clear about how to use multiple offset values.
Perhaps those are called bitmapped offsets.
But if so how do I use them ( example would be fine )
Help would be very welcome.
No one is using Fs2Phidgets ?
Hi there
You would have to create your own variables in the .ini file that
should niclude offset, type, lenght and value if I remebre correctly.
I think people moved away from Fs2Phidgets since John Dyer stopped support for it some time ago.
It seems that he is back with new versions, I am not sure, since I have moved to a SIOC
based TQ.
You can use some of the examples to have an idea.
JF