Cockpitbuilders.com
Main => Builders Discussions => Topic started by: Andrew 737 on October 09, 2014, 11:38:04 AM
Hi Guys
Have any of you set up an FI wet compass in ProSim?
I could really do with some advice!
I tried to set mine up tonight. Set gauge ID to 105 in FI software. I then connected gauge to prosim PC with no FI software.
Systems - configuration - gauges - scroll to bottom of page - set Flight Illusion in first drop down - looked for gauge 105 in the second drop down
Can't find the gauge
Any ideas guys?
Hey Andrew,
Your answer is over at the ProSim forum, under the Hardware thread in Flight Illusions.
I'll leave you in suspense as to the answer....hahaha!
Frank Cooper
Ohh, and here's mine, mounted and fitted and operational, today....
(https://www.cockpitbuilders.com/proxy.php?request=http%3A%2F%2Ffsfiles.org%2Fflightsimshotsv2%2Fimages%2F2014%2F10%2F10%2FxirOU.jpg&hash=81f69bc8fcb1626b5ed94d4a94e697f6f33cbd31)
Frank Cooper
Great to see you finally got it Frank!
I am very happy to see this has been resolved. Frank. I will change the topic accordingly on the other thread.
Thanx Trevor,
I am happy to say that it arrived yesterday and has been mounted already, as you can see.
It's a nice bit of kit and one that finishes off any cockpit. I happy to give them the benefit of the doubt over delays when they produce a nice piece of sim gear like this.
Frank Cooper
Quote from: tennyson on October 10, 2014, 03:02:13 AM
Thanx Trevor,
I am happy to say that it arrived yesterday and has been mounted already, as you can see.
It's a nice bit of kit and one that finishes off any cockpit. I happy to give them the benefit of the doubt over delays when they produce a nice piece of sim gear like this.
Frank Cooper
Awesome
Thanks Frank