Text only | Text with Images

Cockpitbuilders.com

Main => General Discussion Board. => Topic started by: 737man on December 16, 2014, 09:53:48 AM

Title: Prosim Help
Post by: 737man on December 16, 2014, 09:53:48 AM
Any idea how to urn this off? :(
Title: Re: Prosim Help
Post by: Trevor Hale on December 16, 2014, 12:04:32 PM
Don't Pause the Sim LOL

I am guessing you have comms issue with the PFD..  No Simconnect/WideFS, is that possible?
Title: Re: Prosim Help
Post by: 737man on December 16, 2014, 01:54:05 PM
How do I Identify PFD Com issues?  What does PFD stand for?
Title: Re: Prosim Help
Post by: Aerosim Solutions on December 16, 2014, 03:06:23 PM
PFD = Primary Flight Display.

PAUSE will be displayed whenever FSX or P3D is paused or not running. If Prosim is running on it's own it will be in Paused mode - this is normal!

Cheers GP
Title: Re: Prosim Help
Post by: Trevor Hale on December 17, 2014, 02:50:47 AM
Lance, if you are running prosim on a computer other than the flightsim computer you will need to install a software, like WIDEFS that will talk to the flightsim PC and get the data and pass it to the client machine. 

I gather that you don;t have communications with the flightsim (Server) and thats why prosim shows that it is in freeze mode.
Title: Re: Prosim Help
Post by: Sam Llorca on December 17, 2014, 05:38:19 AM
Hello Lance, check the configuration box on ProSim to make sure the network settings are right.

You should enter the IP address of the main machine were ProSim server is running, every windows on ProSim like PFD, Clocks, EICAS, etc has to be configure with the right Server IP address.

Also make sure you have FSUIPC installed on the Simulator and running .  it should work if the network is setup right, every machine with a static IP address and seen each other. Allow ProSim thru Windows Firewall.

Hope this helps, send us a feedback if the problem is resolved.

Cheers,
Text only | Text with Images