Cockpitbuilders.com
Main => Builders Discussions => Topic started by: jackpilot on January 02, 2015, 08:14:52 AM
Cant get these out of the panel.
Usually there are 2 screws on the back that allow the inside part to slide out from the front of the panel.
On this type, the retaining tabs do not allow any acess.
The other difference is the "tab/latch" on the upper part, but pushing it in has no effect.
The lens is a pull/swing type as usual.
Any help?
I think you have to remove the top(legend) with force then the screws are inside. I have a korry that is that way.
Jack,
I am not sure in your korry.
But most of then, just pull out the front and there is one allen screw in the center.
Roberto