Cockpitbuilders.com

I've managed to get my AFDS interfaced, with the help from members of the ProSim forum (willow & wpslider).

From time to time this sells on ebay, a bit pricey, but what a difference compared even to the best replica!

This is the pin table, in case somebody is interested. A phidget 0/16/16 is the ideal card for this.It requires 28v, but really works just fine on more common 24v

J1
1 -
2 -
3 test SW - connect to the 28v ground terminal
4 28v - FMC light
5 A/P ground (connect to Phidget 0/16/16 digital output)
6 A/P ground (connect to Phidget 0/16/16 digital output)
7 A/P ground (connect to Phidget 0/16/16 digital output)
8 A/P ground (connect to Phidget 0/16/16 digital output)
9 A/T ground (connect to Phidget 0/16/16 digital output)
10 A/T ground (connect to Phidget 0/16/16 digital output)
11 A/P pushbutton relay (connect to Phidget 0/16/16 digital input)
12 A/T pushbutton ground (connect like a regular switch to eg a Pokeys card)
13 A/T pushbutton (connect like a regular switch to eg a Pokeys card)
14 28V - amber warning lights
15 28v - red warning lights

J2
1 -
2 -
3 -
4 -
5 FMC pushbutton relay (connect to Phidget 0/16/16 digital input)
6 28v - red warning lights
7 28v - amber warning lights
8 -
9 -
10 -
11 -
12 FMC ground (connect to Phidget 0/16/16 digital output)
13 -
14 -
15 -

Pics courtesy from http://www.flaps2approach.com (http://www.flaps2approach.com)

(https://www.cockpitbuilders.com/proxy.php?request=http%3A%2F%2Ftapatalk.imageshack.com%2Fv2%2F15%2F01%2F27%2F7f12eb992136534cb9af306aecc0c9fb.jpg&hash=86420e99347505dee11151642772bfd823493f12)

Thank you for your "input"
Worth bookmarking..

Please post a picture of the unit.

Jack