Print Page - Help fitting Clipboard to PFC yoke

Title: Help fitting Clipboard to PFC yoke
Post by: Lwmcg52 on February 24, 2015, 03:58:52 AM

I have a Precision Flight Controls Jetliner B737 yoke and a metal yoke checklist clipboard purchased from AGRONN. I was wondering if anyone had fitted such a checklist to this type of yoke. Be interested in how you did it or any suggestions how I might fit the checklist/clipboard to the yoke?
Thanks for any suggestions.

Title: Re: Help fitting Clipboard to PFC yoke
Post by: Aerosim Solutions on February 24, 2015, 08:48:44 PM

I attached mine with several strips of thick double sided mounting tape, I bought it from an auto shop and it is the tape used to fix badges to cars. It means you don't have to drill any holes in the yoke! Cheers Gwyn

Title: Re: Help fitting Clipboard to PFC yoke
Post by: rs3tier on February 25, 2015, 08:30:17 PM

I just had some ACE clipboards turn up yesterday and I mounted them to my Simujabs yokes the same way. Works a treat from what I can tell.

Regards,

Title: Re: Help fitting Clipboard to PFC yoke
Post by: Lwmcg52 on February 27, 2015, 10:27:12 PM

Thanks for the suggestions, will give it a go.

Cockpitbuilders.com

Main => Builders Discussions => Topic started by: Lwmcg52 on February 24, 2015, 03:58:52 AM