Print Page - Any use : 737 CpFlight MCP Pro icw non motorized reverse levers

Title: Any use : 737 CpFlight MCP Pro icw non motorized reverse levers
Post by: GSalden on May 21, 2015, 09:25:22 PM

Hi all,

Currently I have the MCP EL and was thinking of upgrading to the PRO version.
The MCP PRO has an automated AT switch which the EL has not.

I do have a motorized TQ , but it have no motorized reverse levers.
Therefore I always switch AT off at 150 ft..

Is there any use of upgrading ?

Thanks,

Title: Re: Any use : 737 CpFlight MCP Pro icw non motorized reverse levers
Post by: Joe Lavery on May 22, 2015, 12:13:13 AM

Hi GSalden,

The reverse levers are not motorised, they are operated by the pilot after landing.
If you're using the autopilot, the auto throttle should automatically disconnect on touchdown.

Cheers

Joe.

Cockpitbuilders.com

Main => General Discussion Board. => Topic started by: GSalden on May 21, 2015, 09:25:22 PM