Print Page - GPWS Test

Title: GPWS Test
Post by: jackpilot on January 13, 2010, 05:27:23 AM

Hi Captains
What is the proper sequence of announcements with the GPWS test button.?

I make it work by recording a wave regrouping the various sounds (hence the question above) and reassigning the door open/closed keyboard command to that Wav. and to the Test button. I use Posky 737-700 and it has a door Wav. that I do not use.

Title: Re: GPWS Test
Post by: jackpilot on January 16, 2010, 05:47:26 AM

Asking again... :huh: ;)

Title: Re: GPWS Test
Post by: Trevor Hale on January 16, 2010, 06:23:05 AM

LOL.. I wish I could answer this.. but Alas, I am not sure of the answer.. Sorry Jack.

Trev

Title: Re: GPWS Test
Post by: dnoize on January 16, 2010, 07:50:20 AM

The 737 has a short GPWS test and a long GPWS test.

I have both as a WAV file for you if you wish.

Stef

Title: Re: GPWS Test
Post by: jackpilot on January 16, 2010, 11:57:20 AM

Thank you Guys.
Stef , check your PM.
Found this too, on a tip from David Allen.
GPWS Test Mode (http://www.youtube.com/watch?v=LXEgmyE_iG4#)

Title: Re: GPWS Test
Post by: jackpilot on January 16, 2010, 12:09:20 PM

From that video I made this wav file with PMsound waves..not perfect copycat but can help. Stef sounds must be better.

Title: Re: GPWS Test
Post by: dnoize on January 16, 2010, 01:00:51 PM

Files are on their way. Nice clean soundfiles, no ambient sounds.

Stef

Title: Re: GPWS Test
Post by: jackpilot on January 16, 2010, 02:09:02 PM

Got them..thank you very much.
May sound stup. but how do you converts MP3 to Wav? :huh:

Title: Re: GPWS Test
Post by: dnoize on January 17, 2010, 07:42:13 AM

oops...told you they were wav's but they are mp3's sorry.

There should be converters around. I'll see if i can find one.

Stef

Title: Re: GPWS Test
Post by: dnoize on January 17, 2010, 07:43:59 AM

These should do it:

http://www.convertmp3towav.com/ (http://www.convertmp3towav.com/)

Stef

Cockpitbuilders.com

Main => Builders Discussions => Topic started by: jackpilot on January 13, 2010, 05:27:23 AM